In stock
TM-W11-IL SEIR-04
  • Very low supply current
  • Internal filter for PCM frequency
  • Improved immunity against ambient light
  • Insensitive to supply voltage ripple and noise
Model No.: SEIR-04
In stock
TM-W11-AS SEAS-60
3144 Hall switch integrated circuit based on Hall effect principle, the use of manufacturing semiconductor integrated technology of magnetic sensing circuit, it is by voltage adjusting device, Hall voltage generator, differential amplifier, Schmitt trigger, temperature compensation circuit, and an open collector output stage is composed of a magnetic sensing detection circuit.

 

 
Model No.: SEAS-60
In stock
TM-W11-IL SEIR-05

 

BFD-1000 integrates a barrier infrared sensors, unblinded distance can be adjusted by sliding rheostat. BFD-1000 has a specially designed touch detection sensor, making the design more simple from the robot.
Model No.: SEIR-05
In stock
TM-W11-PM PSPS-03
  • Meet UL, CE requirements
  • Ultra-thin, ultra-small
  • Low ripple and low noise
  • 100% load aging and testing

 

 

Model No.: PSPS-03
In stock
TM-W11-C SECU-01
  • 80 kHz bandwidth
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Extremely stable output offset voltage
  • Nearly zero magnetic hysteresis

Model No.: SECU-01
In stock
TM-W11-C SECU-03

The 30A range Current Sensor Module ACS712consists of a precise, low-offset, linear Hall circuit with a copper conductionpath located near the surface of the die. Applied current flowing through thiscopper conduction path generates a magnetic field in which the Hall IC convertsinto a proportional voltage.

Model No.: SECU-03
In stock
TM-W11-C SECU-02
  • 185 mV/A output sensitivity
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Nearly zero magnetic hysteresis
  • Low-noise analog signal path
  • 80 kHz bandwidth 


 

Model No.: SECU-02
In stock
TM-W11-AG SEAG-01

The ADXL335 is a small, thin, low power,"complete 3-axis accelerometer with signal conditioned voltage outputs. Theproduct measures acceleration with a minimum full-scale range of ±3 g.

Model No.: SEAG-01
In stock
TM-W11-AG SEAG-02
  • Main Chipset: ADXL345
  • Measuring Ranging: ±2g±16g
  • Digital Output: SPI/IIC
  • 3-axis, ±2g/±4g/±8g/±16g
  • Working Voltage: 3V to 5V
  • Working Temperature: -40° to 85°
  • Working Current: 30uA

 

Model No.: SEAG-02
In stock
TM-W11-AS SEAS-08
  • Programmable colour light-to-frequency converter
  • Output Enable (OE) pin
  • Output frequency scaling
  • Available in 5mm x 6.2mm SOIC (D) package
Model No.: SEAS-08
In stock
TM-W11-GSM WIWF-11

BeagleBone Black Wireless is based on the extremely successful BeagleBone Black open-source hardware design a high-expansion, maker-focused, community-supported open hardware computer by the BeagleBoard.org Foundation.

Model No.: WIWF-11
In stock
TM-W11-XBEE WIXB-03

 

  • Converts all 20 pins of the XBee to 0.1" standard spacing 
  • Female sockets recommended to avoid having to soldering
  • Requires 2mm sockets and 0.1" headers.

 

 

Model No.: WIXB-03
In stock
TM-W11-GSM WIWF-12
Using the new chip CP2102 with resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download.
 
Model No.: WIWF-12
In stock
TM-W11-WFS CONR-603

It alerts you with siren or push notification when water is detected, letting you know of a leak before it becomes a disaster. A 1.8m cable allows excellent placement flexibility under the sink, behind the water heater, or next to the washing machine, and the mounting hole behind battery case adds to installation flexibility. It is ultra power-efficient, and two AA batteries last up to 1.5

 

 

Model No.: CONR-603
In stock
TM-W11-XBEE WIXB-04

 

  • Used for the XBee module configuration parameters
  • Easily connected to a PC via micro USB cable
  • XBee-setting support software X-CTU
  • Also used as a USB-TTL adapter
  • Voltage: 5V (USB Power)

 

Model No.: WIXB-06
In stock
TM-W11-PM PSPS-10
This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V.
Model No.: PSPS-10
In stock
TM-W11-TH SETH-04
The DHT11 and DHT22 sensors are used tomeasure temperature and relative humidity. These are very popular among makersand electronics hobbyists. These sensors contain a chip that does analogueto digital conversion and spit out a digital signal with the temperature andhumidity.

 

Model No.: SETH-04
In stock
TM-W11-TH SETH-07
  • Low cost
  • 3 to 5V power and I/O
  • Good for 0-100% humidity readings with 2-5% accuracy
  • No more than 0.5 Hz sampling rate (once every 2 seconds)


Model No.: SETH-07
In stock
TM-W11-TH SETH-13
 
The CAREL DP series electronic probes are designed for air-conditioning and air handling, heating and refrigeration applications, to be used in combination with the corresponding CAREL controllers. Versions are available for rooms, industrial environments and ducts.
Model No.: SETH-13
In stock
TM-W11-RF WIRF-08

RFID cards are a common form of packaging for RFID tags. They are secure, convenient, and durable. They are very suitable for access control, payment, identification, and other applications.

Model No.: WIRF-08