In stock
TM-W11-IL SEIR-04
  • Very low supply current
  • Internal filter for PCM frequency
  • Improved immunity against ambient light
  • Insensitive to supply voltage ripple and noise
Model No.: SEIR-04
In stock
TM-W11-AS SEAS-60
3144 Hall switch integrated circuit based on Hall effect principle, the use of manufacturing semiconductor integrated technology of magnetic sensing circuit, it is by voltage adjusting device, Hall voltage generator, differential amplifier, Schmitt trigger, temperature compensation circuit, and an open collector output stage is composed of a magnetic sensing detection circuit.

 

 
Model No.: SEAS-60
In stock
TM-W11-IL SEIR-05

 

BFD-1000 integrates a barrier infrared sensors, unblinded distance can be adjusted by sliding rheostat. BFD-1000 has a specially designed touch detection sensor, making the design more simple from the robot.
Model No.: SEIR-05
In stock
TM-W11-PM PSPS-03
  • Meet UL, CE requirements
  • Ultra-thin, ultra-small
  • Low ripple and low noise
  • 100% load aging and testing

 

 

Model No.: PSPS-03
In stock
TM-W11-C SECU-01
  • 80 kHz bandwidth
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Extremely stable output offset voltage
  • Nearly zero magnetic hysteresis

Model No.: SECU-01
In stock
TM-W11-C SECU-03

The 30A range Current Sensor Module ACS712consists of a precise, low-offset, linear Hall circuit with a copper conductionpath located near the surface of the die. Applied current flowing through thiscopper conduction path generates a magnetic field in which the Hall IC convertsinto a proportional voltage.

Model No.: SECU-03
In stock
TM-W11-C SECU-02
  • 185 mV/A output sensitivity
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Nearly zero magnetic hysteresis
  • Low-noise analog signal path
  • 80 kHz bandwidth 


 

Model No.: SECU-02
In stock
TM-W11-AG SEAG-01

The ADXL335 is a small, thin, low power,"complete 3-axis accelerometer with signal conditioned voltage outputs. Theproduct measures acceleration with a minimum full-scale range of ±3 g.

Model No.: SEAG-01
In stock
TM-W11-AG SEAG-02
  • Main Chipset: ADXL345
  • Measuring Ranging: ±2g±16g
  • Digital Output: SPI/IIC
  • 3-axis, ±2g/±4g/±8g/±16g
  • Working Voltage: 3V to 5V
  • Working Temperature: -40° to 85°
  • Working Current: 30uA

 

Model No.: SEAG-02
In stock
TM-W11-AS SEAS-08
  • Programmable colour light-to-frequency converter
  • Output Enable (OE) pin
  • Output frequency scaling
  • Available in 5mm x 6.2mm SOIC (D) package
Model No.: SEAS-08
In stock
TM-W11-GSM WIWF-11

BeagleBone Black Wireless is based on the extremely successful BeagleBone Black open-source hardware design a high-expansion, maker-focused, community-supported open hardware computer by the BeagleBoard.org Foundation.

Model No.: WIWF-11
In stock
TM-W11-XBEE WIXB-03

 

  • Converts all 20 pins of the XBee to 0.1" standard spacing 
  • Female sockets recommended to avoid having to soldering
  • Requires 2mm sockets and 0.1" headers.

 

 

Model No.: WIXB-03
In stock
TM-W11-GSM WIWF-12
Using the new chip CP2102 with resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download.
 
Model No.: WIWF-12
In stock
TM-W11-WFS CONR-603

It alerts you with siren or push notification when water is detected, letting you know of a leak before it becomes a disaster. A 1.8m cable allows excellent placement flexibility under the sink, behind the water heater, or next to the washing machine, and the mounting hole behind battery case adds to installation flexibility. It is ultra power-efficient, and two AA batteries last up to 1.5

 

 

Model No.: CONR-603
In stock
TM-W11-XBEE WIXB-04

 

  • Used for the XBee module configuration parameters
  • Easily connected to a PC via micro USB cable
  • XBee-setting support software X-CTU
  • Also used as a USB-TTL adapter
  • Voltage: 5V (USB Power)

 

Model No.: WIXB-06
In stock
TM-W11-PM PSPS-10
This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V.
Model No.: PSPS-10
In stock
TM-W11-TH SETH-04
The DHT11 and DHT22 sensors are used tomeasure temperature and relative humidity. These are very popular among makersand electronics hobbyists. These sensors contain a chip that does analogueto digital conversion and spit out a digital signal with the temperature andhumidity.

 

Model No.: SETH-04
In stock
TM-W11-TH SETH-07
  • Low cost
  • 3 to 5V power and I/O
  • Good for 0-100% humidity readings with 2-5% accuracy
  • No more than 0.5 Hz sampling rate (once every 2 seconds)


Model No.: SETH-07
In stock
TM-W11-TH SETH-13
 
The CAREL DP series electronic probes are designed for air-conditioning and air handling, heating and refrigeration applications, to be used in combination with the corresponding CAREL controllers. Versions are available for rooms, industrial environments and ducts.
Model No.: SETH-13
In stock
TM-W11-RF WIRF-08

RFID cards are a common form of packaging for RFID tags. They are secure, convenient, and durable. They are very suitable for access control, payment, identification, and other applications.

Model No.: WIRF-08
In stock
TM-W11-GSM WIWF-09

  • Supports UART/SPIII2CPWMADC/DAC
  • SM D-38 package for easy welding
  • Deep sleep current as low as 6.5iiA
  • Embedded Lwip and FreeRTOS

 

 

Model No.: WIWF-09
In stock
TM-W11-GSM WIWF-03

ESP8266 12E is a miniature Wi-Fi modulepresent in the market and is used for establishing a wireless networkconnection for a microcontroller or processor. The core of ESP-12E is ESP8266EX,"which is a high integration wireless SoC (System on Chip).

Model No.: WIWF-03
In stock
TM-W11-GSM WIWF-01
  • 802.11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Power down leakage current of <10uA
  • MB Flash Memory
  • SDIO 1.1 / 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO

 

Model No.: WIWF-01
In stock
TM-W11-GSM WIWF-08

  • Communication interface voltage: 3.3V
  • Working current: 240mA(MAX)
  • Serial communication format: 8N1
  • Antenna Type: Built-in PCB antenna is available
  • Wireless criteria: 802.11 b / g / n

 

 
Model No.: WIWF-08
In stock
TM-W11-GSM WIWF-06
  • ESP8266 microcontroller NodeMCU Lua WIFI withCP2102 USB.
  • Expand two-way motor-driven, two-waydirect-drive motor.

 

Model No.: WIWF-06
In stock
TM-W11-GSM WIWF-04

 

Open-source, Interactive, Programmable, Lowcost, Simple, Smart, WI-FI enabled
Model No.: WIWF-04
In stock
TM-W11-GSM WIWF-10

Overview:

The ESP8266 Witty Cloud ESP-12F WiFi Module is a powerful WiFi enabled processor in a compact package that incorporates an RGB LED, LDR light sensor and pushbutton for easy stand-alone operation.
 

Features:

This cheap and small Wifi transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, and can also talk to your Wifi router directly through the UART MCU's (Rx, Tx).

  • The ESP-12 module is one of the most complete of the ESP family as it allows you to use the biggest amount of pins of all of them. You can program this module to work stand alone with the Arduino IDE or with LUA as NodeMCU.
  • It has an LDR and a WS2812 led already on board for your projects. The board comes with a CH40 micro USB module to program it.
  • The ESP8266 highly integrated chip, including antenna switch balun, power management converter, so with minimal external circuitry. The system is equipped with ESP8266 manifested leading features are: energy saving VoIP quickly switch between the sleep/wake patterns, with low-power operation adaptive radio bias, front-end signal processing functions.
  • This version, the ESP8266-03 is one of the smallest versions of this module. It includes a built-in ceramic antenna.

 

Model No.: WIWF-10
In stock
TM-W11-WFS MTAM-00108
The water flow sensor outputs pulse proportional to the water flow with Pulse Frequency = Flow *4.8. That is, if the output frequency is 48, then the water flow: 48/4.8= 10(L/min)

 

 

 
Model No.: MTAM-00108
In stock
TM-W11-AS SEAS-12
  • Uses 49E analogue Hall Effect sensor
  • Detects the relative strength of the magneticfield
  • 3.3 or 5V operation 
Model No.: SEAS-12
In stock
TM-W11-BT WIBL-01
HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle.
Model No.: WIBL-01
In stock
TM-W11-BT WIBL-02
HC-06 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle.
Model No.: WIBL-02
In stock
TM-W11-AS SEAS-09

 

The Pulse Sensor can be connected to Arduino,"or plugged into a breadboard. Before we get it up and running, we need toprotect the exposed circuitry so you can get a reliable heartbeat signal.

Model No.: SEAS-09
In stock
TM-W11-PM PSPS-02
  • Ultra-thin, ultra-small
  • Low ripple and low noise
  • High efficiency, high power density 
Model No.: PSPS-02
In stock
TM-W11-XBEE WIWF-16

Explore Trademart find out latest Keyes Xbee Shield Adapter Plate products & other electronic components at a discounted price in Pakistan with cash on delivery service across Pakistan.

Model No.: WIWF-16
In stock
TM-W11-TH SETH-02
  • Linear at 10.0 mV/°C scale factor
  • Suitable for remote applications
  • Operates from 4 to 30 volts
  • Less than 60 mA current drain
     



 

Model No.: SETH-02
In stock
TM-W11-AS SEAS-15
The reed switch contains a pair (or more) of magnetizable, flexible, metal reeds whose end portions are separated by a small gap when the switch is open. The reeds are hermetically sealed in opposite ends of a tubular glass envelope.
Model No.: SEAS-15
In stock
TM-W11-AG SEAG-03

  • Input Voltage: 2.3 - 3.4V
  • Selectable Solder Jumpers on CLK, FSYNC andAD0
  • Digital-output temperature
Model No.: SEAG-03
In stock
TM-W11-GSM WIWF-02
  • Based on ESP-12E ESP8266 wifi board
  • All I/Os output
  • No need to press reset/flash for programming
  • R2 version has CP2102 USB-TTL converter
  • Larger current support

 

Model No.: WIWF-02
In stock
TM-W11-RF ICST-112

Explore Trademart find out latest Omron V680-HA63B RFID System products & other electronic components at a discounted price in Pakistan with cash on delivery service across Pakistan.

Model No.: ICST-112
In stock
TM-W11-RF WIRF-03
  • Integrated MF RC522
  • 13.56MHz contactless communication card chip.
  • Suitable for Smart meters and portablehandheld devices.
  • 14443A compatible transponder signals.
  • ISO14443A frames and error detection.
  • Low cost, and ideal for user equipmentdevelopment.

 

Model No.: WIRF-03
In stock
TM-W11-RF WIRF-07

Explore Trademart, Get latest RFID Card & other electronic components at discounted price in Pakistan with cash on delivery service across Pakistan.

Model No.: WIRF-07
In stock
TM-W11-RF WIRF-02

 

  • Using a single configurable GPIO pin.
  • Can tell if the tag is still near the antenna.
  • Both SoftwareSerial and AltSoftSerial support.

 

 

 
Model No.: WIRF-02
In stock
TM-W11-RF WIRF-05
  • Credit card RFID tag
  • Use with the Phidgets RFID Reader (RB-Phi-06)
  • Thickness: 1mm
  • Protocol: EM-4102 125KHz Read Only
Model No.: WIRF-05
In stock
TM-W11-GSM WIGS-04
  • GPRS class 2/10.
  • High-Quality Product (Not hobby grade).
  • Configurable baud rate.
  • Built-in SIM Card holder.
  • Built-in Network Status LED.
  • Low power.
 

 

Model No.: WIGS-04
In stock
TM-W11-GSM WIGS-05
  • Chip:SIM800L
  • Voltage:3.7-4.2V
  • Module size: 2.5cmx2.3cm

 

 

Model No.: WIGS-05
In stock
TM-W11-GSM WIGS-02
  • GPRS mobile station class B
  • Supports Real Time Clock
  • Standard SIM Card
  • 12V DC supply
Model No.: WIGS-02
In stock
TM-W11-GSM WIGS-01
  • Dual-Band 900/ 1800 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+
  • Class 4 (2 W @900 MHz)
  • Class 1 (1 W @ 1800MHz)
 
Model No.: WIGS-01
In stock
TM-W11-AS SEAS-22
  • Small module.
  • Operable up to 138°C.
  • Quality tested cooling cells.
  • Solid state, vibration free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink.
Model No.: SEAS-22
In stock
TM-W11-AS SEAS-40
  • Small module.
  • Quality tested cooling cells.
  • Solid-state, vibration-free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink.
 
Model No.: SEAS-40
In stock
TM-W11-AS SEAS-62
Utilized in high-end consumer, commercial,"and military-grade applications for extreme performance and maximum energyefficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
Model No.: SEAS-62