Description:
OFFSET DISC HARROW (16 DISC)
MOUNTED CUM TRAILED
The Offset Disc Harrow has a heavier weight per Disc and thus has the penetration ability to break down large clods normally left after disc plowing or Chisel Plowing on hard grounds. It is of robust construction, used as mounted or trailed, and ideal for chopping and mixing of stubbles and crop residues in the soils.
The disc Harrow prepares the seedbed leaving the soil in granular form which is the most suitable structure for plant growth. It aerates the soil, helps to conserve moisture for longer periods, and eradicates weeds.
In sandy loam soils, this implement can also be used as a primary tillage implement. The depth of plowing is regulated simply by manipulating the offset angles of the gauges. By removing simply a pin, the mounted position can be converted into trailed position and vice versa.
Application |
For tilling and incorporation of crop residue into the soil |
|
|
Length
Mounted position Trailed position
|
2200 mm ± 20 mm 3400 mm ± 30 mm
|
|
|
Height
Mounted position Trailed position
|
1725 mm ± 20 mm 940 mm ± 10 mm
|
|
|
Weight (min.) |
850 kg ± 10 kg |
|
|
Main frame |
M.S. box 150 × 150 × 5 mm or rolled channel 6 mm M.S. sheet |
|
|
Mast (A-frame) |
Inverted T-type, M.S. box 75 × 75 × 5 mm |
|
|
Hitch assembly |
30 mm dia. M.S. round hook, 18 mm M.S. plate bracket, rotatable |
|
|
Hitch brackets |
25 mm M.S. plate |
|
|
Disc |
608 mm dia., 4.5 mm thick, hardened steel (HRC ? 40) |
|
|
Disc spacer |
Cast Iron with male-female hex |
|
|
Disc scraper |
5 6 mm M.S. sheet |
|
|
Gang shaft |
68 70 mm M.S. round |
|
|
Gang angling beam |
M.S. box 75 × 75 × 5 mm, angle iron reinforced with M.S. flat 62 × 6 mm carrying adjusting holes |
|
|
Pivot assembly |
C-Type yoke/bracket, 50 mm M.S. plate, and 6 mm M.S. sheet, with M.S. bush 9 mm wall thickness and 44 45 mm dia. pin |
|
|
Disc gang standard |
15 mm M.S. plate reinforced or box 5 6 mm M.S. sheet |
|
|
Transport wheel |
02 Nos. 6.00 16, pneumatic, rim 18 kg (min) |
|
|
Paint |
Double coat with primer after surface finish |
|
|
Nuts and bolts |
To be tightened with spring washers |
|
|
Bearings |
European standard or Equivalent |
|
|
Warranty |
Free: 1 year for parts and service Extended: 5 years for parts supply on payment |
|
|