In stock
TM-R-SM TCBOX65
Model No.: TCBOX65
-20%
In stock
TM-R-SM TCBOX5
  • Ampere Rating: 1.5 A
  • Shaft Dia: 5mm
Model No.: TCBOX5
NEMA 23 Stepper Motor 2.7A 1.8 degree High Torque, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM B425
This is NEMA 23 Stepper Motor 4 Wire Bipolar. NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: B425,TMD,Th100,KRT
-20%
In stock
TM-R-SM B546

Nema23 4 wire Bipolar Stepper Motor is High precision 6-wire bipolar stepper motor, size in NEMA 23, 1.8 deg. step angle (200 … It is one of most parameters for the stepper motor). The motor was specified to have a max current of 2.2A

Model No.: B425,TMD,Th100,KRT
-20%
In stock
TM-R-SM Th20
  • Shaft Dia= 5mm
  • Step Angle: 1.8°
  • Phase Current: 1.2A
  • Phase Resistance: 1.5Ohm
  • Phase Inductance: 2.8mH
  • Holding Torque: 40N.cm
Model No.: Th20
-20%
In stock
TM-R-SM B616
  • Weight: 350 g (13 oz)
  • Shaft diameter: 5 mm Round
  • Steps per revolution: 200
  • Current rating: 1.2 A per coil
  • Voltage rating: 4 V
  • Resistance: 1.6Ω per coil
  • Holding torque: 3.2 kg-cm (44 oz-in)
  • Lead length: 4cm
  • Output shaft supported by two ball bearings (internally).
Model No.: B616
-20%
In stock
TM-R-SM EBUVEX56
  • 4.5v dc
  • 2a
  • 6 wire.
  • Bipolar
Model No.: EBUVEX56
-20%
In stock
TM-R-SM 2011

This 42BYGHW804 IM42HS60 NEMA17 Stepper Motor For 3D Printer is High-torque stepper motor in size NEMA 17 (42 mm) with 1.8° step angle (full step) with D-Shaft for easy and reliable connection with coupler.

Model No.: 2011
-20%
In stock
TM-R-SM B418
  • This is a high-quality motor that can be used for a long time without getting stuck.
  • It has quite stable performance during work and will not lose a step.
  • Low noise and high torque, is a great choice if you need a stepper motor.
Model No.: B418
-20%
In stock
TM-R-SM Bip 48
This is NEMA 23 Stepper Motor 4 Wire Bipolar. NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: Bip 48
-20%
In stock
TM-R-SM KRT134
  • 1x PMM33AH2 Step Motor
  • The primary features of stepping motors are the ability to obtain precise positioning and the simplicity of design. They achieve this by rotating and stopping at step angle increments that are determined by the pole structure of the rotor and stator.
Model No.: KRT134
-20%
In stock
TM-R-SM Hyb 51
  • Brand Name: JMC
  • Model Number: 110J18115-460
  • Phase: 2
  • Type: Hybrid
Model No.: Hyb 51
-21%
In stock
TM-R-SM TMD08
  • Material:The thickness of the damper is 6 mm, its material is brass of good wear-resisting performance, not easy to break and can serve you for a long time
  • Stepper Dampers are used to decrease noise and resonance in your CNC and 3d Printer.
Model No.: TMD08
2 Phase Hybrid Stepper Motors NEMA23 1.8 Degree JK57HS112, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM TMD21
2 Phase 2.8N. M Hybrid Stepper Motors NEMA23 1.8 Degree Textile Machinery JK57HS112:NEMA 23 Hybrid Stepper Motor Model Number: JK57HS112-4204 Phase: 2 Phase Lead Wire (No. ): 4wire Structure: Hybrid Step Angle: 1.8° Motor Height: 57 mm Holding Torque: 2.8N. M Speed: Low / High speed Certification: CE, RoHS, ISO9001 Shape: Square Applications:Use for the robots stepper motor, electronic automatic equipment stepping motor, medical instrument stepping motor, advertisements instrument stepper motor, lighting & audio equipment stepper motor, printer stepper motor, textile machinery stepper motor....
Model No.: TMD21
-20%
In stock
TM-R-SM TMD100
NEMA 17 Stepper Motor is a basic stepper motor for 3D printer and CNC applications. Stepper motor is very useful in various applications, especially which demands low speed with high precision.
Model No.: TMD100
-20%
In stock
TM-R-SM MDL2
Bipolar NEMA23 1.8 Degree 2A Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: MDL2
-20%
In stock
TM-R-SM TMD5
This motor has a step angle of 1.8 deg., this means that it has 200 steps per revolution and for every step, it will cover 1.8°. This NEMA 34 is a 2-Phase motor with 4 wires. Compatible controllers for this motor are CW230, CW250 and CW860.
Model No.: TMD5
NEMA43 10AMP 1500RPM Stepper Motor  E41HMHA-LNK-NS-00 1.8 Stepper Motor, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM LS30
  • Step Size 1.8 degree
  • Voltage 35
  • Current 10amp
  • pot 185W
  • Rpm 1500
  • Bipolar parallel
Model No.: LS30
-20%
In stock
TM-R-SM TMD20
This is NEMA23 4 Wire Bipolar Stepper Motor NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: TMD20
-20%
In stock
TM-R-SM Nem34
Nema 34 100mm Stepper Motor is a high torque hybrid bipolar stepping motor with a 3.4×3.4 inch faceplate. Nema 34 100mm Stepper Motor, Hybrid stepper has the combination of the features of the Variable Reluctance Stepper Motor and Permanent Magnet Stepper Motor.
Model No.: Nem34
MINEBEA NEMA 17 Stepper Motor For 3D Printer & CNC, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM TMD101
This is a brand new MINEBEA company made NEMA 17 stepper motor for 3D Printer application & CNC applications, This NEMA 17 stepper motor is very useful in the various application especially which demands low speed with high precision.
Model No.: TMD101
Arduino 28BYJ48 5V Stepper Motor High Torque Stepper Motor With Gear, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM B 193
  • Model : 28BYJ-48
  • Number of Phase : 4
  • Speed Variation Ratio : 1/64
  • Stride Angle : 5.625° /64
  • Rated voltage : DC [5v - 12v]
Model No.: B 193
Bipolar NEMA23 1.8 Degree 2A Stepper Motor In Pakistan, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM MDL3
  • Step Angle: 1.8°
  • Phase Current: 2A
  • Phase Resistance: 1.5Ohm
  • Phase Inductance: 2.8mH
  • Holding Torque: 40N.cm
Model No.: MDL3
-20%
In stock
TM-R-SM KRT505
Nema17 4 wire Bipolar Stepper Motor us very useful in the various application especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc. Nema17 4 wire Bipolar Stepper Motor is High precision 4–wire bipolar stepper motor, size in Nema 17, 1.8 deg.
Model No.: KRT505
-20%
In stock
TM-R-SM Th5
NEMA17 6 Wire Bipolar Stepper Motor useful in various application especially demands low speed with best high precision. Many machines like 3D Printers, CNC Router & Mills, Camera Platforms, XYZ Plotters.
Model No.: Th5
ERAETECH Stepper motor Driver EDU-301D, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD TC6B1
Model No.: TC6B1
STK672-080 Constant Current Sine Wave Unipolar 6 Wires Stepper Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD B 242
STK672-080 Stepping Motor Driver Sine Wave Drive Output Current , STK672-080 Unipolar stepper board is high efficient stepper driver for Unipolar stepper motor been design for various application like CNC, robotics, control routers, lathes, mills, PCB drillers and engravers.
Model No.: B 242
KA3100D Stepping Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD SB 18
The KA3100D is a monolithic integrated circuit, andsuitable as a two-phase stepping motor driver of a FDDsystem.
Model No.: SB 18
-20%
In stock
TM-R-MD B 05
The STK672-050 is a stepping motor driver Hybrid IC uses power MOSFETs in the output stage. STK672-050 includes a built-in microstepping controller and is based on unipolar constant-current PWM system.
Model No.: B 05
2DM542 Stepper Motor Driver In Pakistan, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD TMD24
Just Motion 2DM542 is 4.2 Ampare stepper motor driver with options for microstepping in the range from 400 to 25600steps/rev. 2DM542 Current setting can be set from 1A to 4.2A.
Model No.: TMD24
ZK 5AD Dual H Bridge Channel DC Motor Drive Controller Board, Motors Controllers - Trademart.pk -20%
In stock
TM-R-MD B 198
  • High power
  • Small size
  • Simple operation
  • Dual Driver
  • Support independent control for 2 motors
Model No.: B 198
TB6600 Stepper Motor Driver in Pakistan, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD TMD10
  • 9V-42V DC power supply.
  • Output current: 0.5A-4.0A.
  • Drive mode: Dual constant current PWM drive output.
  • Strong anti-interference ability.
  • Low vibration, low noise.
Model No.: TMD10
-20%
In stock
TM-R-MD B190
TB6560 is a very common and easy to use stepper motor driver for 4 wire stepper motor or hybrid stepper motor for cnc application
Model No.: B190
-20%
In stock
TM-R-MD 3138
  • 2-Phase numerical stepper driver, AC20V-70V or DC24V-70VDC
  • New 32-bit DSP technology
  • Optically isolated differential signal inputs (26LS32)
Model No.: 3138
PCA9685 Servo Motor Driver 16-Channel 12 Bit PWM Servo Motor Driver Module, Servo Drives - Trademart.pk -20%
In stock
TM-R-MD B 227
With this PCA9685 Servo Motor Driver 16-Channel 12 Bit PWM Servo Motor Driver Module, you can control 16 free-running PWM outputs with just two pins.
Model No.: B 227
ULN2003 Stepper Motor Drive Unipolar stepper Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD B193
The ULN2003 stepper motor driver board allows you to easily control the 28BYJ-48 stepper motor from a microcontroller, like the Arduino Uno. One side of the board side has a 5 wire socket where the cable from the stepper motor hooks up and 4 LEDs to indicate which coil is currently powered. The motor cable only goes in one way, which always helps. On the side you have a motor on / off jumper (keep it on to enable power to the stepper). The two pins below the 4 resistors, is where you provide power to the stepper. Note that powering the stepper from the 5V rail of the Arduino is not recommended. A separate 5-12V 1Amp power supply...
Model No.: B193
12V Dc Motor Speed Controller Fan Speed Controller, Motors Controllers - Trademart.pk -20%
In stock
TM-R-MD SB 141
This is 12v dc motor speed controller or dimmer which is designed for precise control of interior accent lighting in your auto, truck, RV, boat or aircraft.
Model No.: SB 141
-20%
In stock
TM-R-MD B 154
  • 1X A4988
  • 1X heatsink
Model No.: B 154
MG945 Metal Gear Servo Motor 180 Degree, Servomotors - Trademart.pk -13%
In stock
TM-R-SEM TCBOX83
  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls
Model No.: TCBOX83
-17%
In stock
TM-R-SEM B 151
  • Servo DM-RS151M×1PCS
  • 2 x round servo disc horns
  • 2 x mounting screws
Model No.: B 151
-50%
In stock
TM-R-SEM B298
  • Motor: Brushed
  • Gear Train: Plastic
  • Ball Bearing: No
  • Type: Analogue
Model No.: B298
-40%
In stock
TM-R-SEM B173
  • Micro size
  • Great for truck, Boat, Racing Car, Helicopter & Airplane
Model No.: B173
TowerPro SG90 SG 90 180 Degree Degree Servo Motor, Servomotors - Trademart.pk -10%
In stock
TM-R-SEM B 175
  • Operating Voltage: 4.8~6.0V
  • Torque : 1.6kg/cm(4.8V)
  • Dead Band Width : 5usec
  • Cable Length : 25cm
  • Servo Type : Analog Servo
  • Brand Model : Tower Pro SG90
Model No.: B 175
High Torque DC Gear Motor 25W 24V 1500RPM, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM TCB61
  • Type: Gear Motor
  • Rated Voltage: 24V Dc
  • Current: 0.7A
  • Power: 25W
  • Speed: 1500RPM
Model No.: TCB61
DC Worm Gear Motor AXO40231, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM B677
  • Japanese Motor
  • RPM= 18 RPM
  • Voltage= 1 to 24v
  • Torque=25kg / cm
Model No.: B677
7.4VDC 3500RPM DC Motor RS755 High Speed High Torque Motor CY 755 3835, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM b782
  • Motor type: 755-3835
  • Voltage: DC7.4V-12V
  • 12V about 6000 rpm
  • No-load current: 7.4V0.49A 12V0.56A
  • Shaft diameter: 5mm Shaft Length: 20mm
  • No-load speed: about 3700 rpm at 7.4V
Model No.: b782
12V 50W Worm Gear Motor, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM KRT145
These are traditionally built and used for car wipers, but they can also be run as a highly efficient worm drive motor.This particular unit has extremely tight tolerances (zero backlash) and an ultra smooth motor and gearbox.
Model No.: KRT145
Namiki 12V Coreless DC Motor 120rpm w/Encoder (16.5kg*cm) (USED), DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B225
  • Model: 22CL-3501PG
  • Operating Voltage: 12VDC
  • Rated power: 15W
  • Stall torque: 16.5kg*cm
  • Continuous torque: 5kg*cm
  • Diameter: 22mm
Model No.: B225
High Torque Encoder Geared DC Motor 12V 12V DC Motor with Encoder, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM IMP10
  • High power brushed DC gear motor
  • Nominal Voltage: 12V DC
Model No.: IMP10
DVD Mini Tray Spindle Motor 5.9V DC RF-300F-12350, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM b43
  • Power Source: Dc
  • Current Type: DC
  • Shaft type: straight
  • Load Current: 0.093A
  • Shaft Diameter: 2.0m
Model No.: b43