In stock
ID11873 B533,DELL
  • Motor Frame Size: 1.1 in. sq.
  • Shaft: Single
  • Type: Standard
  • Shaft-Gear Type: Round Shaft (No Gearhead)
  • Lead Wires: 5
  • Current per Phase: 0.75 A per phase
  • Step Angle: 0.72 °
  • Rotor Inertia (oz-in2): 0.05 oz-in2
  • Maximum Holding Torque (lb-in): 0.29
In stock
TM-ENG-Dosing Pump 432
  • Adjustable constant and proportional flow rates to suit the application
  • Password protection for added security (digital models)
  • Programmable timer for regular dosing
  • A Multi-colour LED status system simplifies pump monitoring
  • Level control input ensures the pump does not run dry
  • Five-year guarantee
In stock
TM-ENG-Motors 012
An electric motor is an electrical machine that converts electrical energy into mechanical energy. Most electric motors operate through the interaction between the motor’s magnetic field and electric current in a wire winding to generate force in the form of torque applied on the motor’s shaft. An electric generator is mechanically identical to an electric motor, but operates with a reversed flow of power, converting mechanical energy into electrical energy.
Toy Motor Mini DC Motor Mini Electric Motor PMMC Motor, DC Motors - Trademart.pk -21%
In stock
TM-R-DCM SB 28
  • Speed = 11360 rpm    
  • current = 2.92 A    
  • Torque = 2.92 mN-m    
  • Torque = 29.8 g.cm    
  • Output = 3.47 W
Model No.: SB 28
-21%
In stock
TM-R-SM TMD08
  • Material:The thickness of the damper is 6 mm, its material is brass of good wear-resisting performance, not easy to break and can serve you for a long time
  • Stepper Dampers are used to decrease noise and resonance in your CNC and 3d Printer.
Model No.: TMD08
KA3100D Stepping Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD SB 18
The KA3100D is a monolithic integrated circuit, andsuitable as a two-phase stepping motor driver of a FDDsystem.
Model No.: SB 18
Mini DC Motor Mini Electric Motor PMMC Motor, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM SB27
  • Working Voltage= 3v to 12v
  • Current 0.25 to 1Amp
Model No.: SB27
ULN2003 Stepper Motor Drive Unipolar stepper Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD B193
The ULN2003 stepper motor driver board allows you to easily control the 28BYJ-48 stepper motor from a microcontroller, like the Arduino Uno. One side of the board side has a 5 wire socket where the cable from the stepper motor hooks up and 4 LEDs to indicate which coil is currently powered. The motor cable only goes in one way, which always helps. On the side you have a motor on / off jumper (keep it on to enable power to the stepper). The two pins below the 4 resistors, is where you provide power to the stepper. Note that powering the stepper from the 5V rail of the Arduino is not recommended. A separate 5-12V 1Amp power supply...
Model No.: B193
In stock
TM-W11-SSM ROKI-06

OVERVIEW:

This gear motor wheel is perfect for your next robotics project. This gear box is ideal for robotic car or line-tracing robot. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inch long, 0.85 inch wide and 0.7 inch thick . The wheel can be mounted on either side and the gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48 you can get some really good torque at 5 Volts.

Model No.: ROKI-06
-20%
In stock
TM-R-MD B 05
The STK672-050 is a stepping motor driver Hybrid IC uses power MOSFETs in the output stage. STK672-050 includes a built-in microstepping controller and is based on unipolar constant-current PWM system.
Model No.: B 05
12V Dc Motor Speed Controller Fan Speed Controller, Motors Controllers - Trademart.pk -20%
In stock
TM-R-MD SB 141
This is 12v dc motor speed controller or dimmer which is designed for precise control of interior accent lighting in your auto, truck, RV, boat or aircraft.
Model No.: SB 141
In stock
TM-W11-SSM ROMO-SR-01

OVERVIEW:

Explore trademart.pk, Get latest Tower Pro & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We provide Tower Pro products at official prices from distributor and dealers in Pakistan.

Model No.: ROMO-SR-01
DVD Mini Tray Spindle Motor 5.9V DC RF-300F-12350, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM b43
  • Power Source: Dc
  • Current Type: DC
  • Shaft type: straight
  • Load Current: 0.093A
  • Shaft Diameter: 2.0m
Model No.: b43
MABUCHI Motor 12V CW 2400RPM 500AD2F EG-510ED-2F In Pakistan, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B314
  1. VDC (V): 6
  2. RPM: 2400
  3. Diameter (D): ~ 38 mm.
Model No.: B314
-20%
In stock
TM-R-MD B 154
  • 1X A4988
  • 1X heatsink
Model No.: B 154
In stock
ID10230 B682,TMD100,Th20,KRT 83
  • Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
  • This is a high-quality motor that can be used for a long time without stuck.
  • It has a quite stable performance during work and will not lose a step.
  • Low noise and big torque, this is a great choice if you need a stepper motor.
  • Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
In stock
TM-W11-SSM ROMO-DC-01

OVERVIEW:

Explore trademart.pk find out latest DC motor 12V 60 RPM products & other electronic components at a discounted price inPakistan with free cash on delivery service across Pakistan. We are officialdistributors of DC motor 12V 60 RPM in Pakistan

60RPM DC Motor is a high-quality low-cost DCgeared motor. It has steel gears and pinions to ensure longer life and betterwear and tear properties. The gears are fixed on hardened steel spindlespolished to a mirror finish. Gearbox is sealed and lubricated with lithiumgrease and require no maintenance. The motor is screwed to the gearbox frominside.

Although motor gives 60 RPM at 12V but motorruns smoothly from 4V to 12V and gives a wide range of RPM, and torque. Tablesbelow gives a fairly good idea of the motor’s performance in terms of RPM and noload current as a function of voltage and stall torque, stall current as afunction of voltage.

Model No.: ROMO-DC-01
Helicopter Coreless Micro DC Motor With Propeller, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM SB28
  • 1x Micro DC Motor
  • 1x Propeller
Model No.: SB28
In stock
TM-W11-SSM ROKI-04

OVERVIEW:

  • Working Voltage: DC3V ~ 12V (recommendedworking voltage at around 6 to 8V)
  • The maximum torque: 800gf cm min (3V)
  • No-load speed: 1:48 (3V)
  • The load current: 70mA (3V), 250mA (MAX)
  • Motor Size: 70*22*18mm/2.75*0.86*0.7"
  • Tire Parameter:
  • Center Hole: 5.3*3.66mm/0.2*0.14"
  • Wheel Size: approx.66*26mm/2.59*1.02"
Model No.: ROKI-04
In stock
TM-W11-SSM ROMO-SR-06

OVERVIEW:

This is a low-cost micro size's metal gear RC servo with 1.80kg.cm holding torque (at 4.8V). It is a perfect solution for student robotic projects who build arms or linkages.  The advantage of RC servo over the DC brush motor is the ability to control its rotation angle.
If you are building a system or project that use many RC servo motors, please consider getting the 8 Channels Servo Controller or 16 Channels Servo Controller. They will make your life easier.


Features:

  • Micro size
  • Great for truck, Boat, Racing Car, Helicopter and Airplane


Document:

Model No.: ROMO-SR-06
Arduino 28BYJ48 5V Stepper Motor High Torque Stepper Motor With Gear, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM B 193
  • Model : 28BYJ-48
  • Number of Phase : 4
  • Speed Variation Ratio : 1/64
  • Stride Angle : 5.625° /64
  • Rated voltage : DC [5v - 12v]
Model No.: B 193
In stock
  • Model No: PMM33AH2C39
  • Precise Positioning and simple in design
  • Low Vibration
  • Low Noise operation
  • Step Angle: 0.72 Degree
  • Current Rating: 0.75A
ZK 5AD Dual H Bridge Channel DC Motor Drive Controller Board, Motors Controllers - Trademart.pk -20%
In stock
TM-R-MD B 198
  • High power
  • Small size
  • Simple operation
  • Dual Driver
  • Support independent control for 2 motors
Model No.: B 198
PCA9685 Servo Motor Driver 16-Channel 12 Bit PWM Servo Motor Driver Module, Servo Drives - Trademart.pk -20%
In stock
TM-R-MD B 227
With this PCA9685 Servo Motor Driver 16-Channel 12 Bit PWM Servo Motor Driver Module, you can control 16 free-running PWM outputs with just two pins.
Model No.: B 227
-20%
In stock
TM-R-SM KRT505
Nema17 4 wire Bipolar Stepper Motor us very useful in the various application especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc. Nema17 4 wire Bipolar Stepper Motor is High precision 4–wire bipolar stepper motor, size in Nema 17, 1.8 deg.
Model No.: KRT505
In stock
ID9206 B512KRT148
  • Step Angle: 1.8
  • Holding Torque: 4.8kg.cm
  • Rated Voltage: 3.6Volt
  • Rated Current: 1.2A/Phase
  • Form Factor: NEMA 17
  • Shaft Type D-Shaft
  • Wire Connector JST PH male connector.
  • 2-Phase (4-Wires)
  • Holding Torque: 48N.cm (4800g-cm)
7.4VDC 3500RPM DC Motor RS755 High Speed High Torque Motor CY 755 3835, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM b782
  • Motor type: 755-3835
  • Voltage: DC7.4V-12V
  • 12V about 6000 rpm
  • No-load current: 7.4V0.49A 12V0.56A
  • Shaft diameter: 5mm Shaft Length: 20mm
  • No-load speed: about 3700 rpm at 7.4V
Model No.: b782
-20%
In stock
TM-R-SM B418
  • This is a high-quality motor that can be used for a long time without getting stuck.
  • It has quite stable performance during work and will not lose a step.
  • Low noise and high torque, is a great choice if you need a stepper motor.
Model No.: B418
-20%
In stock
TM-R-SM TMD100
NEMA 17 Stepper Motor is a basic stepper motor for 3D printer and CNC applications. Stepper motor is very useful in various applications, especially which demands low speed with high precision.
Model No.: TMD100
In stock
TM-W11-SSM ROMO-SR-04

OVERVIEW:

MG-945 Servo Motor - Metal Gear - Tower Prois a Futaba remote control compatible powerful servo motor which is suitablefor RC projects. The motor can be controlled by PWM signals and its gearbox ismetal. MG-945 Servo Motor - Metal Gear - Tower Pro has changeable servo headersincluded in the pack.

Features:

  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls
Model No.: ROMO-SR-04
-20%
In stock
TM-R-SM MDL2
Bipolar NEMA23 1.8 Degree 2A Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: MDL2
MINEBEA NEMA 17 Stepper Motor For 3D Printer & CNC, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM TMD101
This is a brand new MINEBEA company made NEMA 17 stepper motor for 3D Printer application & CNC applications, This NEMA 17 stepper motor is very useful in the various application especially which demands low speed with high precision.
Model No.: TMD101
In stock
TM-W11-SSM ROMO-SR-02

Features:

  • Coreless motor and double ball bearing.
  • Less noise, light weight.
  • Used for model airplane accessories.
  • Stable performance and shock proof.
  • Used for all remote control applications mainly R/C cars boats planes and as tail servos for helicopter.

Model No.: ROMO-SR-02
-20%
In stock
TM-R-SM Th20
  • Shaft Dia= 5mm
  • Step Angle: 1.8°
  • Phase Current: 1.2A
  • Phase Resistance: 1.5Ohm
  • Phase Inductance: 2.8mH
  • Holding Torque: 40N.cm
Model No.: Th20
In stock
TM-W11-SSM ROMO-SR-05

OVERVIEW:

This High-Torque MG996R Digital Servo features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock-proofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. 
This high-torque standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG996R Metal Gear Servo also comes with a selection of arms and hardware to get
you set up nice and fast! 

Features:

  • Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc...
  • Great for truck, boat, racing car, helicopter and airplane Power Supply: Through External Adapter.
  • Stable and Shock Proof - Coreless Motor - Metal Gear - Double Ball Bearing -
  • Connector Wire Length 300mm.


Document:


Model No.: ROMO-SR-05
In stock
TM-W11-SSM ROMO-SR-03

OVERVIEW:

MG995 Servo Motor - Metal Gear - Tower Pro isa Futaba remote control compatible powerful servo motor which is suitable forRC projects. The motor can be controlled by PWM signals and its gearbox ismetal. Its working angle range is between 30 and 160 degrees. MG995 Servo Motor- Metal Gear - Tower Pro has changeable servo headers included in the pack.    

Features:

  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls

Document:

Tower Pro MG995 Servo Motor

Model No.: ROMO-SR-03
-20%
In stock
TM-R-SM B616
  • Weight: 350 g (13 oz)
  • Shaft diameter: 5 mm Round
  • Steps per revolution: 200
  • Current rating: 1.2 A per coil
  • Voltage rating: 4 V
  • Resistance: 1.6Ω per coil
  • Holding torque: 3.2 kg-cm (44 oz-in)
  • Lead length: 4cm
  • Output shaft supported by two ball bearings (internally).
Model No.: B616
-20%
In stock
TM-R-SM Th5
NEMA17 6 Wire Bipolar Stepper Motor useful in various application especially demands low speed with best high precision. Many machines like 3D Printers, CNC Router & Mills, Camera Platforms, XYZ Plotters.
Model No.: Th5
-20%
In stock
TM-R-MD B190
TB6560 is a very common and easy to use stepper motor driver for 4 wire stepper motor or hybrid stepper motor for cnc application
Model No.: B190
TowerPro SG90 SG 90 180 Degree Degree Servo Motor, Servomotors - Trademart.pk -10%
In stock
TM-R-SEM B 175
  • Operating Voltage: 4.8~6.0V
  • Torque : 1.6kg/cm(4.8V)
  • Dead Band Width : 5usec
  • Cable Length : 25cm
  • Servo Type : Analog Servo
  • Brand Model : Tower Pro SG90
Model No.: B 175
BLDC Motor A2212 930KV Outrunner Brushless DC Motors for RC Helicopter Quad copter Multi-copter, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B69
This A2212 930KV BRUSHLESS MOTOR motor for the airplane aircraft quadcopter. A2212 930KV BRUSHLESS MOTOR OUTRUNNER with 80% maximum efficiency, 4-10A max efficiency current, and 12A / 60s current capacity. Suitable for Airplane, Aircraft, Quadcopter.
Model No.: B69
MG945 Metal Gear Servo Motor 180 Degree, Servomotors - Trademart.pk -13%
In stock
TM-R-SEM TCBOX83
  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls
Model No.: TCBOX83
-50%
In stock
TM-R-SEM B298
  • Motor: Brushed
  • Gear Train: Plastic
  • Ball Bearing: No
  • Type: Analogue
Model No.: B298
STK672-080 Constant Current Sine Wave Unipolar 6 Wires Stepper Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD B 242
STK672-080 Stepping Motor Driver Sine Wave Drive Output Current , STK672-080 Unipolar stepper board is high efficient stepper driver for Unipolar stepper motor been design for various application like CNC, robotics, control routers, lathes, mills, PCB drillers and engravers.
Model No.: B 242
In stock
TM-R-SM TCBOX65
Model No.: TCBOX65
Namiki 12V Coreless DC Motor 120rpm w/Encoder (16.5kg*cm) (USED), DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B225
  • Model: 22CL-3501PG
  • Operating Voltage: 12VDC
  • Rated power: 15W
  • Stall torque: 16.5kg*cm
  • Continuous torque: 5kg*cm
  • Diameter: 22mm
Model No.: B225
-40%
In stock
TM-R-SEM B173
  • Micro size
  • Great for truck, Boat, Racing Car, Helicopter & Airplane
Model No.: B173
-20%
In stock
TM-R-SM TCBOX5
  • Ampere Rating: 1.5 A
  • Shaft Dia: 5mm
Model No.: TCBOX5
In stock
TM-W11-SSM ROMO-DC-03

OVERVIEW:

Explore trademart.pk find out latest DC Motors products & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We are dealing DC Motors in Pakistan.

Model No.: ROMO-DC-03
High Torque Encoder Geared DC Motor 12V 12V DC Motor with Encoder, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM IMP10
  • High power brushed DC gear motor
  • Nominal Voltage: 12V DC
Model No.: IMP10