In stock
ID9206 B512KRT148
  • Step Angle: 1.8
  • Holding Torque: 4.8kg.cm
  • Rated Voltage: 3.6Volt
  • Rated Current: 1.2A/Phase
  • Form Factor: NEMA 17
  • Shaft Type D-Shaft
  • Wire Connector JST PH male connector.
  • 2-Phase (4-Wires)
  • Holding Torque: 48N.cm (4800g-cm)
In stock
TM-W11-SSM ROMO-SR-05

OVERVIEW:

This High-Torque MG996R Digital Servo features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock-proofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. 
This high-torque standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG996R Metal Gear Servo also comes with a selection of arms and hardware to get
you set up nice and fast! 

Features:

  • Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc...
  • Great for truck, boat, racing car, helicopter and airplane Power Supply: Through External Adapter.
  • Stable and Shock Proof - Coreless Motor - Metal Gear - Double Ball Bearing -
  • Connector Wire Length 300mm.


Document:


Model No.: ROMO-SR-05
In stock
TM-W11-SSM ROMO-DC-01

OVERVIEW:

Explore trademart.pk find out latest DC motor 12V 60 RPM products & other electronic components at a discounted price inPakistan with free cash on delivery service across Pakistan. We are officialdistributors of DC motor 12V 60 RPM in Pakistan

60RPM DC Motor is a high-quality low-cost DCgeared motor. It has steel gears and pinions to ensure longer life and betterwear and tear properties. The gears are fixed on hardened steel spindlespolished to a mirror finish. Gearbox is sealed and lubricated with lithiumgrease and require no maintenance. The motor is screwed to the gearbox frominside.

Although motor gives 60 RPM at 12V but motorruns smoothly from 4V to 12V and gives a wide range of RPM, and torque. Tablesbelow gives a fairly good idea of the motor’s performance in terms of RPM and noload current as a function of voltage and stall torque, stall current as afunction of voltage.

Model No.: ROMO-DC-01
In stock
TM-ENG-Dosing Pump 432
  • Adjustable constant and proportional flow rates to suit the application
  • Password protection for added security (digital models)
  • Programmable timer for regular dosing
  • A Multi-colour LED status system simplifies pump monitoring
  • Level control input ensures the pump does not run dry
  • Five-year guarantee
High Torque Encoder Geared DC Motor 12V 12V DC Motor with Encoder, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM IMP10
  • High power brushed DC gear motor
  • Nominal Voltage: 12V DC
Model No.: IMP10
High Torque DC Gear Motor 25W 24V 1500RPM, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM TCB61
  • Type: Gear Motor
  • Rated Voltage: 24V Dc
  • Current: 0.7A
  • Power: 25W
  • Speed: 1500RPM
Model No.: TCB61
In stock
  • Model No: PMM33AH2C39
  • Precise Positioning and simple in design
  • Low Vibration
  • Low Noise operation
  • Step Angle: 0.72 Degree
  • Current Rating: 0.75A
12V 50W Worm Gear Motor, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM KRT145
These are traditionally built and used for car wipers, but they can also be run as a highly efficient worm drive motor.This particular unit has extremely tight tolerances (zero backlash) and an ultra smooth motor and gearbox.
Model No.: KRT145
ZK 5AD Dual H Bridge Channel DC Motor Drive Controller Board, Motors Controllers - Trademart.pk -20%
In stock
TM-R-MD B 198
  • High power
  • Small size
  • Simple operation
  • Dual Driver
  • Support independent control for 2 motors
Model No.: B 198
DC Gear Motor With Encoder With Wheel, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM RAWLIXDC21
  • Rpm=250 (at 12v)
  • No-load current= 0.3A
  • Maximum Load Current=2.5A
  • Operating Voltage=3v To 24V
  • Encoder Voltage=3V To 5V
Model No.: RAWLIXDC
In stock
TM-ENG-Motors 012
An electric motor is an electrical machine that converts electrical energy into mechanical energy. Most electric motors operate through the interaction between the motor’s magnetic field and electric current in a wire winding to generate force in the form of torque applied on the motor’s shaft. An electric generator is mechanically identical to an electric motor, but operates with a reversed flow of power, converting mechanical energy into electrical energy.
BLDC Motor A2212 930KV Outrunner Brushless DC Motors for RC Helicopter Quad copter Multi-copter, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B69
This A2212 930KV BRUSHLESS MOTOR motor for the airplane aircraft quadcopter. A2212 930KV BRUSHLESS MOTOR OUTRUNNER with 80% maximum efficiency, 4-10A max efficiency current, and 12A / 60s current capacity. Suitable for Airplane, Aircraft, Quadcopter.
Model No.: B69
-20%
In stock
TM-R-SM Th20
  • Shaft Dia= 5mm
  • Step Angle: 1.8°
  • Phase Current: 1.2A
  • Phase Resistance: 1.5Ohm
  • Phase Inductance: 2.8mH
  • Holding Torque: 40N.cm
Model No.: Th20
In stock
ID10230 B682,TMD100,Th20,KRT 83
  • Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
  • This is a high-quality motor that can be used for a long time without stuck.
  • It has a quite stable performance during work and will not lose a step.
  • Low noise and big torque, this is a great choice if you need a stepper motor.
  • Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
In stock
TM-W11-SSM ROMO-SR-07

OVERVIEWS:

  • Heat Resistance
  • Durable Metal Gear
  • Programmable Digital Amplifier with MosftDrive
  • Bottom Side Axial Mount Hole
  • Original factory product
  • Less Noise
  • Orientation Angle: maximum of 270 degree

 

Document:

Servo RDS3115 MG Dual Axis Digital Servo forRobot

Model No.: ROMO-SR-07
MABUCHI Motor 12V CW 2400RPM 500AD2F EG-510ED-2F In Pakistan, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B314
  1. VDC (V): 6
  2. RPM: 2400
  3. Diameter (D): ~ 38 mm.
Model No.: B314
In stock
TM-W11-SSM ROMO-SR-04

OVERVIEW:

MG-945 Servo Motor - Metal Gear - Tower Prois a Futaba remote control compatible powerful servo motor which is suitablefor RC projects. The motor can be controlled by PWM signals and its gearbox ismetal. MG-945 Servo Motor - Metal Gear - Tower Pro has changeable servo headersincluded in the pack.

Features:

  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls
Model No.: ROMO-SR-04
12V Dc Motor Speed Controller Fan Speed Controller, Motors Controllers - Trademart.pk -20%
In stock
TM-R-MD SB 141
This is 12v dc motor speed controller or dimmer which is designed for precise control of interior accent lighting in your auto, truck, RV, boat or aircraft.
Model No.: SB 141
DC Worm Gear Motor AXO40231, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM B677
  • Japanese Motor
  • RPM= 18 RPM
  • Voltage= 1 to 24v
  • Torque=25kg / cm
Model No.: B677
In stock
ID11873 B533,DELL
  • Motor Frame Size: 1.1 in. sq.
  • Shaft: Single
  • Type: Standard
  • Shaft-Gear Type: Round Shaft (No Gearhead)
  • Lead Wires: 5
  • Current per Phase: 0.75 A per phase
  • Step Angle: 0.72 °
  • Rotor Inertia (oz-in2): 0.05 oz-in2
  • Maximum Holding Torque (lb-in): 0.29
In stock
TM-W11-SSM ROMO-DC-03

OVERVIEW:

Explore trademart.pk find out latest DC Motors products & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We are dealing DC Motors in Pakistan.

Model No.: ROMO-DC-03
In stock
TM-W11-SSM ROMD-10

FEATURES:

  • Step angle accuracy: ± 5% (full step, notload)
  • Resistance accuracy: ± 10%
  • Inductance accuracy; ± 20%
  • Temperature rise: 80deg Max (rated current, 2phase on)
  • Ambient temperature: -20deg ~ +50deg
  • Insulation Resistance: 100M? Min, 500VDC
  • Insulation Strength: 500VAC for one minute
  • 6.35mm OR 8mm diameter shaft
Model No.: ROMD-10
Bipolar NEMA23 1.8 Degree 2A Stepper Motor In Pakistan, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM MDL3
  • Step Angle: 1.8°
  • Phase Current: 2A
  • Phase Resistance: 1.5Ohm
  • Phase Inductance: 2.8mH
  • Holding Torque: 40N.cm
Model No.: MDL3
-20%
In stock
TM-R-SM KRT134
  • 1x PMM33AH2 Step Motor
  • The primary features of stepping motors are the ability to obtain precise positioning and the simplicity of design. They achieve this by rotating and stopping at step angle increments that are determined by the pole structure of the rotor and stator.
Model No.: KRT134
TowerPro SG90 SG 90 180 Degree Degree Servo Motor, Servomotors - Trademart.pk -10%
In stock
TM-R-SEM B 175
  • Operating Voltage: 4.8~6.0V
  • Torque : 1.6kg/cm(4.8V)
  • Dead Band Width : 5usec
  • Cable Length : 25cm
  • Servo Type : Analog Servo
  • Brand Model : Tower Pro SG90
Model No.: B 175
In stock
TM-W11-SSM ROMO-SR-02

Features:

  • Coreless motor and double ball bearing.
  • Less noise, light weight.
  • Used for model airplane accessories.
  • Stable performance and shock proof.
  • Used for all remote control applications mainly R/C cars boats planes and as tail servos for helicopter.

Model No.: ROMO-SR-02
2DM542 Stepper Motor Driver In Pakistan, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD TMD24
Just Motion 2DM542 is 4.2 Ampare stepper motor driver with options for microstepping in the range from 400 to 25600steps/rev. 2DM542 Current setting can be set from 1A to 4.2A.
Model No.: TMD24
In stock
TM-W11-SSM SDLS-1767

OVERVIEW:

Go to the “BUY NOW” button and have it at your doorstep.

Explore trademart.pk to find the latest “Dfrobot” products and other electronic components at discounted prices in Pakistan with cash-on-delivery service available throughout the country.

Model No.: SDLS-1767
-20%
In stock
TM-R-SM 2011

This 42BYGHW804 IM42HS60 NEMA17 Stepper Motor For 3D Printer is High-torque stepper motor in size NEMA 17 (42 mm) with 1.8° step angle (full step) with D-Shaft for easy and reliable connection with coupler.

Model No.: 2011
-20%
In stock
TM-R-SM Hyb 51
  • Brand Name: JMC
  • Model Number: 110J18115-460
  • Phase: 2
  • Type: Hybrid
Model No.: Hyb 51
Namiki 12V Coreless DC Motor 120rpm w/Encoder (16.5kg*cm) (USED), DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B225
  • Model: 22CL-3501PG
  • Operating Voltage: 12VDC
  • Rated power: 15W
  • Stall torque: 16.5kg*cm
  • Continuous torque: 5kg*cm
  • Diameter: 22mm
Model No.: B225
Mini DC Motor Mini Electric Motor PMMC Motor, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM SB27
  • Working Voltage= 3v to 12v
  • Current 0.25 to 1Amp
Model No.: SB27
2 Phase Hybrid Stepper Motors NEMA23 1.8 Degree JK57HS112, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM TMD21
2 Phase 2.8N. M Hybrid Stepper Motors NEMA23 1.8 Degree Textile Machinery JK57HS112:NEMA 23 Hybrid Stepper Motor Model Number: JK57HS112-4204 Phase: 2 Phase Lead Wire (No. ): 4wire Structure: Hybrid Step Angle: 1.8° Motor Height: 57 mm Holding Torque: 2.8N. M Speed: Low / High speed Certification: CE, RoHS, ISO9001 Shape: Square Applications:Use for the robots stepper motor, electronic automatic equipment stepping motor, medical instrument stepping motor, advertisements instrument stepper motor, lighting & audio equipment stepper motor, printer stepper motor, textile machinery stepper motor....
Model No.: TMD21
Toy Motor Mini DC Motor Mini Electric Motor PMMC Motor, DC Motors - Trademart.pk -21%
In stock
TM-R-DCM SB 28
  • Speed = 11360 rpm    
  • current = 2.92 A    
  • Torque = 2.92 mN-m    
  • Torque = 29.8 g.cm    
  • Output = 3.47 W
Model No.: SB 28
-40%
In stock
TM-R-SEM B173
  • Micro size
  • Great for truck, Boat, Racing Car, Helicopter & Airplane
Model No.: B173
-20%
In stock
TM-R-SM TCBOX5
  • Ampere Rating: 1.5 A
  • Shaft Dia: 5mm
Model No.: TCBOX5
In stock
TM-W11-SSM ROMO-SR-01

OVERVIEW:

Explore trademart.pk, Get latest Tower Pro & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We provide Tower Pro products at official prices from distributor and dealers in Pakistan.

Model No.: ROMO-SR-01
DVD Mini Tray Spindle Motor 5.9V DC RF-300F-12350, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM b43
  • Power Source: Dc
  • Current Type: DC
  • Shaft type: straight
  • Load Current: 0.093A
  • Shaft Diameter: 2.0m
Model No.: b43
-50%
In stock
TM-R-SEM B298
  • Motor: Brushed
  • Gear Train: Plastic
  • Ball Bearing: No
  • Type: Analogue
Model No.: B298
NEMA 23 Stepper Motor 2.7A 1.8 degree High Torque, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM B425
This is NEMA 23 Stepper Motor 4 Wire Bipolar. NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: B425,TMD,Th100,KRT
In stock
TM-W11-SSM ROMO-SR-03

OVERVIEW:

MG995 Servo Motor - Metal Gear - Tower Pro isa Futaba remote control compatible powerful servo motor which is suitable forRC projects. The motor can be controlled by PWM signals and its gearbox ismetal. Its working angle range is between 30 and 160 degrees. MG995 Servo Motor- Metal Gear - Tower Pro has changeable servo headers included in the pack.    

Features:

  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls

Document:

Tower Pro MG995 Servo Motor

Model No.: ROMO-SR-03
7.4VDC 3500RPM DC Motor RS755 High Speed High Torque Motor CY 755 3835, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM b782
  • Motor type: 755-3835
  • Voltage: DC7.4V-12V
  • 12V about 6000 rpm
  • No-load current: 7.4V0.49A 12V0.56A
  • Shaft diameter: 5mm Shaft Length: 20mm
  • No-load speed: about 3700 rpm at 7.4V
Model No.: b782
NEMA43 10AMP 1500RPM Stepper Motor  E41HMHA-LNK-NS-00 1.8 Stepper Motor, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM LS30
  • Step Size 1.8 degree
  • Voltage 35
  • Current 10amp
  • pot 185W
  • Rpm 1500
  • Bipolar parallel
Model No.: LS30
In stock
TM-W11-SSM ROMO-SR-06

OVERVIEW:

This is a low-cost micro size's metal gear RC servo with 1.80kg.cm holding torque (at 4.8V). It is a perfect solution for student robotic projects who build arms or linkages.  The advantage of RC servo over the DC brush motor is the ability to control its rotation angle.
If you are building a system or project that use many RC servo motors, please consider getting the 8 Channels Servo Controller or 16 Channels Servo Controller. They will make your life easier.


Features:

  • Micro size
  • Great for truck, Boat, Racing Car, Helicopter and Airplane


Document:

Model No.: ROMO-SR-06
-20%
In stock
TM-R-SM KRT505
Nema17 4 wire Bipolar Stepper Motor us very useful in the various application especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc. Nema17 4 wire Bipolar Stepper Motor is High precision 4–wire bipolar stepper motor, size in Nema 17, 1.8 deg.
Model No.: KRT505
-20%
In stock
TM-R-MD 3138
  • 2-Phase numerical stepper driver, AC20V-70V or DC24V-70VDC
  • New 32-bit DSP technology
  • Optically isolated differential signal inputs (26LS32)
Model No.: 3138
PCA9685 Servo Motor Driver 16-Channel 12 Bit PWM Servo Motor Driver Module, Servo Drives - Trademart.pk -20%
In stock
TM-R-MD B 227
With this PCA9685 Servo Motor Driver 16-Channel 12 Bit PWM Servo Motor Driver Module, you can control 16 free-running PWM outputs with just two pins.
Model No.: B 227
-20%
In stock
TM-R-SM TMD100
NEMA 17 Stepper Motor is a basic stepper motor for 3D printer and CNC applications. Stepper motor is very useful in various applications, especially which demands low speed with high precision.
Model No.: TMD100
In stock
TM-W11-SSM ROKI-04

OVERVIEW:

  • Working Voltage: DC3V ~ 12V (recommendedworking voltage at around 6 to 8V)
  • The maximum torque: 800gf cm min (3V)
  • No-load speed: 1:48 (3V)
  • The load current: 70mA (3V), 250mA (MAX)
  • Motor Size: 70*22*18mm/2.75*0.86*0.7"
  • Tire Parameter:
  • Center Hole: 5.3*3.66mm/0.2*0.14"
  • Wheel Size: approx.66*26mm/2.59*1.02"
Model No.: ROKI-04
KA3100D Stepping Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD SB 18
The KA3100D is a monolithic integrated circuit, andsuitable as a two-phase stepping motor driver of a FDDsystem.
Model No.: SB 18