2 Phase Hybrid Stepper Motors NEMA23 1.8 Degree JK57HS112, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM TMD21
2 Phase 2.8N. M Hybrid Stepper Motors NEMA23 1.8 Degree Textile Machinery JK57HS112:NEMA 23 Hybrid Stepper Motor Model Number: JK57HS112-4204 Phase: 2 Phase Lead Wire (No. ): 4wire Structure: Hybrid Step Angle: 1.8° Motor Height: 57 mm Holding Torque: 2.8N. M Speed: Low / High speed Certification: CE, RoHS, ISO9001 Shape: Square Applications:Use for the robots stepper motor, electronic automatic equipment stepping motor, medical instrument stepping motor, advertisements instrument stepper motor, lighting & audio equipment stepper motor, printer stepper motor, textile machinery stepper motor....
Model No.: TMD21
-20%
In stock
TM-R-SM Hyb 51
  • Brand Name: JMC
  • Model Number: 110J18115-460
  • Phase: 2
  • Type: Hybrid
Model No.: Hyb 51
High Torque DC Gear Motor 25W 24V 1500RPM, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM TCB61
  • Type: Gear Motor
  • Rated Voltage: 24V Dc
  • Current: 0.7A
  • Power: 25W
  • Speed: 1500RPM
Model No.: TCB61
-20%
In stock
TM-R-SM Nem34
Nema 34 100mm Stepper Motor is a high torque hybrid bipolar stepping motor with a 3.4×3.4 inch faceplate. Nema 34 100mm Stepper Motor, Hybrid stepper has the combination of the features of the Variable Reluctance Stepper Motor and Permanent Magnet Stepper Motor.
Model No.: Nem34
-20%
In stock
TM-R-MD 3138
  • 2-Phase numerical stepper driver, AC20V-70V or DC24V-70VDC
  • New 32-bit DSP technology
  • Optically isolated differential signal inputs (26LS32)
Model No.: 3138
-20%
In stock
TM-R-SM TMD5
This motor has a step angle of 1.8 deg., this means that it has 200 steps per revolution and for every step, it will cover 1.8°. This NEMA 34 is a 2-Phase motor with 4 wires. Compatible controllers for this motor are CW230, CW250 and CW860.
Model No.: TMD5
2DM542 Stepper Motor Driver In Pakistan, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD TMD24
Just Motion 2DM542 is 4.2 Ampare stepper motor driver with options for microstepping in the range from 400 to 25600steps/rev. 2DM542 Current setting can be set from 1A to 4.2A.
Model No.: TMD24
NEMA43 10AMP 1500RPM Stepper Motor  E41HMHA-LNK-NS-00 1.8 Stepper Motor, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM LS30
  • Step Size 1.8 degree
  • Voltage 35
  • Current 10amp
  • pot 185W
  • Rpm 1500
  • Bipolar parallel
Model No.: LS30
12V 50W Worm Gear Motor, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM KRT145
These are traditionally built and used for car wipers, but they can also be run as a highly efficient worm drive motor.This particular unit has extremely tight tolerances (zero backlash) and an ultra smooth motor and gearbox.
Model No.: KRT145
ERAETECH Stepper motor Driver EDU-301D, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD TC6B1
Model No.: TC6B1
In stock
TM-W11-SSM SDLS-1767

OVERVIEW:

Go to the “BUY NOW” button and have it at your doorstep.

Explore trademart.pk to find the latest “Dfrobot” products and other electronic components at discounted prices in Pakistan with cash-on-delivery service available throughout the country.

Model No.: SDLS-1767
In stock
TM-W11-SSM ROMO-SR-07

OVERVIEWS:

  • Heat Resistance
  • Durable Metal Gear
  • Programmable Digital Amplifier with MosftDrive
  • Bottom Side Axial Mount Hole
  • Original factory product
  • Less Noise
  • Orientation Angle: maximum of 270 degree

 

Document:

Servo RDS3115 MG Dual Axis Digital Servo forRobot

Model No.: ROMO-SR-07
-20%
In stock
TM-R-SM EBUVEX56
  • 4.5v dc
  • 2a
  • 6 wire.
  • Bipolar
Model No.: EBUVEX56
DC Gear Motor With Encoder With Wheel, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM RAWLIXDC21
  • Rpm=250 (at 12v)
  • No-load current= 0.3A
  • Maximum Load Current=2.5A
  • Operating Voltage=3v To 24V
  • Encoder Voltage=3V To 5V
Model No.: RAWLIXDC
In stock
TM-W11-SSM ROMD-10

FEATURES:

  • Step angle accuracy: ± 5% (full step, notload)
  • Resistance accuracy: ± 10%
  • Inductance accuracy; ± 20%
  • Temperature rise: 80deg Max (rated current, 2phase on)
  • Ambient temperature: -20deg ~ +50deg
  • Insulation Resistance: 100M? Min, 500VDC
  • Insulation Strength: 500VAC for one minute
  • 6.35mm OR 8mm diameter shaft
Model No.: ROMD-10
NEMA 23 Stepper Motor 2.7A 1.8 degree High Torque, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM B425
This is NEMA 23 Stepper Motor 4 Wire Bipolar. NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: B425,TMD,Th100,KRT
-20%
In stock
TM-R-SM B546

Nema23 4 wire Bipolar Stepper Motor is High precision 6-wire bipolar stepper motor, size in NEMA 23, 1.8 deg. step angle (200 … It is one of most parameters for the stepper motor). The motor was specified to have a max current of 2.2A

Model No.: B425,TMD,Th100,KRT
DC Worm Gear Motor AXO40231, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM B677
  • Japanese Motor
  • RPM= 18 RPM
  • Voltage= 1 to 24v
  • Torque=25kg / cm
Model No.: B677
-17%
In stock
TM-R-SEM B 151
  • Servo DM-RS151M×1PCS
  • 2 x round servo disc horns
  • 2 x mounting screws
Model No.: B 151
-20%
In stock
TM-R-SM KRT134
  • 1x PMM33AH2 Step Motor
  • The primary features of stepping motors are the ability to obtain precise positioning and the simplicity of design. They achieve this by rotating and stopping at step angle increments that are determined by the pole structure of the rotor and stator.
Model No.: KRT134
-20%
In stock
TM-R-SM TMD20
This is NEMA23 4 Wire Bipolar Stepper Motor NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: TMD20
In stock
TM-W11-SSM PSGS-162

OVERVIEW:

Go to the “BUY NOW” button and have it at your doorstep.

Explore trademart.pk to find the latest “JGA25-370-CE Electric Gear Motor” products and other electronic components at discounted prices in Pakistan with cash-on-delivery service available throughout the country.

Model No.: PSGS-162
-20%
In stock
TM-R-SM Bip 48
This is NEMA 23 Stepper Motor 4 Wire Bipolar. NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: Bip 48
In stock
TM-W11-SSM ROMD-09

OVERVIEW:

A series of stepper motors with flange60mmx60mm (also known as NEMA24), slightly larger than the most common NEMA23.

The larger internal rotor allows to improvethe performance of the application when the load is highly inertial, as itimproves the inertia relation between the motor and the load itself.

Different windings are available for anoptimal use of the motor at different speeds. The model M1243044 at low phaseinductance is particularly suitable when the drive is supplied at 24Vdc.

Features:

  • 200 steps per revolution, 1.8 degrees
  • Coil #1: Red & Yellow wire pair. Coil #2Green & Brown/Gray wire pair.
  • Bipolar stepper, requires 2 full H-bridges!
  • 4-wire, 8-inch leads
  • 42mm/1.65" square body
  • 31mm/1.22" square mounting holes, 3mmmetric screws (M3)
  • 5mm diameter drive shaft, 24mm long, with amachined flat
  • 12V rated voltage (you can drive it at alower voltage, but the torque will drop) at 350mA max current
  • 28 oz*in, 20 N*cm, 2 Kg*cm holding torque perphase
  • 35 ohms per winding

Document:

NEMA 24 Stepper Motor

Model No.: ROMD-09
-20%
In stock
TM-R-SM 2011

This 42BYGHW804 IM42HS60 NEMA17 Stepper Motor For 3D Printer is High-torque stepper motor in size NEMA 17 (42 mm) with 1.8° step angle (full step) with D-Shaft for easy and reliable connection with coupler.

Model No.: 2011
TB6600 Stepper Motor Driver in Pakistan, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD TMD10
  • 9V-42V DC power supply.
  • Output current: 0.5A-4.0A.
  • Drive mode: Dual constant current PWM drive output.
  • Strong anti-interference ability.
  • Low vibration, low noise.
Model No.: TMD10
In stock
TM-W11-SSM ROMD-08

OVERVIEW:

A stepper motor to satisfy all your roboticsneeds! This 4-wire bipolar stepper has 1.8° per step for smooth motion and anice holding torque. The motor was specified to have a max current of 350mA sothat it could be driven easily with an Adafruit motor shield for Arduino (orother motor driver) and a wall adapter or lead-acid battery.

Some nice details include a ready-to-go cableand a machined drive shaft (so you can easily attach stuff). We drove it withan Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. Toconnect to our shield, put the wires in this order: Red, Yellow, skip ground,"Green, Brown (or Gray).

 

Features:

  • 200 steps per revolution, 1.8 degrees
  • Coil #1: Red & Yellow wire pair. Coil #2Green & Brown/Gray wire pair.
  • Bipolar stepper, requires 2 full H-bridges!
  • 4-wire, 8-inch leads
  • 42mm/1.65" square body
  • 31mm/1.22" square mounting holes, 3mmmetric screws (M3)
  • 5mm diameter drive shaft, 24mm long, with amachined flat
  • 12V rated voltage (you can drive it at alower voltage, but the torque will drop) at 350mA max current
  • 28 oz*in, 20 N*cm, 2 Kg*cm holding torque perphase
  • 35 ohms per winding

 

Document:

NEMA 17 Stepper Motor

Model No.: ROMD-08
High Torque Encoder Geared DC Motor 12V 12V DC Motor with Encoder, DC Gear Motor - Trademart.pk -20%
In stock
TM-R-DCM IMP10
  • High power brushed DC gear motor
  • Nominal Voltage: 12V DC
Model No.: IMP10
Bipolar NEMA23 1.8 Degree 2A Stepper Motor In Pakistan, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM MDL3
  • Step Angle: 1.8°
  • Phase Current: 2A
  • Phase Resistance: 1.5Ohm
  • Phase Inductance: 2.8mH
  • Holding Torque: 40N.cm
Model No.: MDL3
In stock
TM-W11-SSM ROMO-DC-03

OVERVIEW:

Explore trademart.pk find out latest DC Motors products & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We are dealing DC Motors in Pakistan.

Model No.: ROMO-DC-03
Namiki 12V Coreless DC Motor 120rpm w/Encoder (16.5kg*cm) (USED), DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B225
  • Model: 22CL-3501PG
  • Operating Voltage: 12VDC
  • Rated power: 15W
  • Stall torque: 16.5kg*cm
  • Continuous torque: 5kg*cm
  • Diameter: 22mm
Model No.: B225
-40%
In stock
TM-R-SEM B173
  • Micro size
  • Great for truck, Boat, Racing Car, Helicopter & Airplane
Model No.: B173
-20%
In stock
TM-R-SM TCBOX5
  • Ampere Rating: 1.5 A
  • Shaft Dia: 5mm
Model No.: TCBOX5
-50%
In stock
TM-R-SEM B298
  • Motor: Brushed
  • Gear Train: Plastic
  • Ball Bearing: No
  • Type: Analogue
Model No.: B298
STK672-080 Constant Current Sine Wave Unipolar 6 Wires Stepper Motor Driver, Stepper Motor Drives - Trademart.pk -20%
In stock
TM-R-MD B 242
STK672-080 Stepping Motor Driver Sine Wave Drive Output Current , STK672-080 Unipolar stepper board is high efficient stepper driver for Unipolar stepper motor been design for various application like CNC, robotics, control routers, lathes, mills, PCB drillers and engravers.
Model No.: B 242
In stock
TM-R-SM TCBOX65
Model No.: TCBOX65
BLDC Motor A2212 930KV Outrunner Brushless DC Motors for RC Helicopter Quad copter Multi-copter, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM B69
This A2212 930KV BRUSHLESS MOTOR motor for the airplane aircraft quadcopter. A2212 930KV BRUSHLESS MOTOR OUTRUNNER with 80% maximum efficiency, 4-10A max efficiency current, and 12A / 60s current capacity. Suitable for Airplane, Aircraft, Quadcopter.
Model No.: B69
MG945 Metal Gear Servo Motor 180 Degree, Servomotors - Trademart.pk -13%
In stock
TM-R-SEM TCBOX83
  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls
Model No.: TCBOX83
TowerPro SG90 SG 90 180 Degree Degree Servo Motor, Servomotors - Trademart.pk -10%
In stock
TM-R-SEM B 175
  • Operating Voltage: 4.8~6.0V
  • Torque : 1.6kg/cm(4.8V)
  • Dead Band Width : 5usec
  • Cable Length : 25cm
  • Servo Type : Analog Servo
  • Brand Model : Tower Pro SG90
Model No.: B 175
-20%
In stock
TM-R-MD B190
TB6560 is a very common and easy to use stepper motor driver for 4 wire stepper motor or hybrid stepper motor for cnc application
Model No.: B190
-20%
In stock
TM-R-SM Th5
NEMA17 6 Wire Bipolar Stepper Motor useful in various application especially demands low speed with best high precision. Many machines like 3D Printers, CNC Router & Mills, Camera Platforms, XYZ Plotters.
Model No.: Th5
-20%
In stock
TM-R-SM B616
  • Weight: 350 g (13 oz)
  • Shaft diameter: 5 mm Round
  • Steps per revolution: 200
  • Current rating: 1.2 A per coil
  • Voltage rating: 4 V
  • Resistance: 1.6Ω per coil
  • Holding torque: 3.2 kg-cm (44 oz-in)
  • Lead length: 4cm
  • Output shaft supported by two ball bearings (internally).
Model No.: B616
In stock
TM-W11-SSM ROMO-SR-03

OVERVIEW:

MG995 Servo Motor - Metal Gear - Tower Pro isa Futaba remote control compatible powerful servo motor which is suitable forRC projects. The motor can be controlled by PWM signals and its gearbox ismetal. Its working angle range is between 30 and 160 degrees. MG995 Servo Motor- Metal Gear - Tower Pro has changeable servo headers included in the pack.    

Features:

  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls

Document:

Tower Pro MG995 Servo Motor

Model No.: ROMO-SR-03
In stock
TM-W11-SSM ROMO-SR-05

OVERVIEW:

This High-Torque MG996R Digital Servo features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock-proofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. 
This high-torque standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG996R Metal Gear Servo also comes with a selection of arms and hardware to get
you set up nice and fast! 

Features:

  • Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc...
  • Great for truck, boat, racing car, helicopter and airplane Power Supply: Through External Adapter.
  • Stable and Shock Proof - Coreless Motor - Metal Gear - Double Ball Bearing -
  • Connector Wire Length 300mm.


Document:


Model No.: ROMO-SR-05
-20%
In stock
TM-R-SM Th20
  • Shaft Dia= 5mm
  • Step Angle: 1.8°
  • Phase Current: 1.2A
  • Phase Resistance: 1.5Ohm
  • Phase Inductance: 2.8mH
  • Holding Torque: 40N.cm
Model No.: Th20
In stock
TM-W11-SSM ROMO-SR-02

Features:

  • Coreless motor and double ball bearing.
  • Less noise, light weight.
  • Used for model airplane accessories.
  • Stable performance and shock proof.
  • Used for all remote control applications mainly R/C cars boats planes and as tail servos for helicopter.

Model No.: ROMO-SR-02
-20%
In stock
TM-R-SM MDL2
Bipolar NEMA23 1.8 Degree 2A Stepper Motor is very useful in the various application especially which demands low speed with high precision.
Model No.: MDL2
MINEBEA NEMA 17 Stepper Motor For 3D Printer & CNC, Stepper Motors - Trademart.pk -20%
In stock
TM-R-SM TMD101
This is a brand new MINEBEA company made NEMA 17 stepper motor for 3D Printer application & CNC applications, This NEMA 17 stepper motor is very useful in the various application especially which demands low speed with high precision.
Model No.: TMD101
In stock
TM-W11-SSM ROMO-SR-04

OVERVIEW:

MG-945 Servo Motor - Metal Gear - Tower Prois a Futaba remote control compatible powerful servo motor which is suitablefor RC projects. The motor can be controlled by PWM signals and its gearbox ismetal. MG-945 Servo Motor - Metal Gear - Tower Pro has changeable servo headersincluded in the pack.

Features:

  • Suitable for RC projects
  • Controllable by PWM signals
  • Changeable servo headers
  • Compatible with Futaba remote controls
Model No.: ROMO-SR-04
7.4VDC 3500RPM DC Motor RS755 High Speed High Torque Motor CY 755 3835, DC Motors - Trademart.pk -20%
In stock
TM-R-DCM b782
  • Motor type: 755-3835
  • Voltage: DC7.4V-12V
  • 12V about 6000 rpm
  • No-load current: 7.4V0.49A 12V0.56A
  • Shaft diameter: 5mm Shaft Length: 20mm
  • No-load speed: about 3700 rpm at 7.4V
Model No.: b782