In stock
TM-W11-GSM WIGS-04
  • GPRS class 2/10.
  • High-Quality Product (Not hobby grade).
  • Configurable baud rate.
  • Built-in SIM Card holder.
  • Built-in Network Status LED.
  • Low power.
 

 

Model No.: WIGS-04
In stock
TM-W11-GSM WIGS-05
  • Chip:SIM800L
  • Voltage:3.7-4.2V
  • Module size: 2.5cmx2.3cm

 

 

Model No.: WIGS-05
In stock
TM-W11-GSM WIGS-02
  • GPRS mobile station class B
  • Supports Real Time Clock
  • Standard SIM Card
  • 12V DC supply
Model No.: WIGS-02
In stock
TM-W11-GSM WIGS-01
  • Dual-Band 900/ 1800 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+
  • Class 4 (2 W @900 MHz)
  • Class 1 (1 W @ 1800MHz)
 
Model No.: WIGS-01
In stock
TM-W11-MD SAVR-164

OVERVIEW:

TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors.
The stepper driver supports speed and direction control. You can set its micro-step and output current with 6 DIP switch. There are 7 kinds of micro-steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability.
As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.

Features:

  • 9V-42V DC power supply.
  • Output current: 0.5A-4.0A.
  • Drive mode: Dual constant current PWM drive output.
  • Strong anti-interference ability.
  • Low vibration, low noise.
  • Insulation resistance: >500M? at normal temperature and pressure.
  • Insulation strength: 500V/min at normal temperature and pressure.
  • With overheating, overcurrent, under-voltage lockout, input voltage anti-reverse protection, and other functions.
  • Can drive 4-wire, 6-wire, 8-wire stepper motors.


Document:

Model No.: SAVR-164
In stock
TM-W11-AS SEAS-22
  • Small module.
  • Operable up to 138°C.
  • Quality tested cooling cells.
  • Solid state, vibration free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink.
Model No.: SEAS-22
In stock
TM-W11-AS SEAS-40
  • Small module.
  • Quality tested cooling cells.
  • Solid-state, vibration-free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink.
 
Model No.: SEAS-40
In stock
TM-W11-AS SEAS-62
Utilized in high-end consumer, commercial,"and military-grade applications for extreme performance and maximum energyefficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
Model No.: SEAS-62
In stock
TM-W11-GSM SDLS-1768

 

The FMB125 is a small, professional tracker with an internal GSM antenna and an external GNSS antenna, which is able to collect device coordinates, and other useful data, and transmit them via the GSM network to the server.
Model No.: SDLS-1768
In stock
TM-W11-TH SETH-03
  • Calibrated Directly in C
  • 2C Accuracy over Temperature (Typ)
  • 0.5C Linearity (Typ)
  • Stable with Large Capacitive Loads
  • Less than 50 A Quiescent Current
  • Shutdown Current 0.5A Max
  • Low Self-Heating
Model No.: SETH-03
In stock
TM-W11-GSM DPAR-03
  • Security and integrity protection
  • Supports all satellite augmentation systems
  • Advanced jamming and spoofing detection

 

Model No.: DPAR-03
In stock
TM-W11-GSM WIGS-03
  • SIM card slot for 1.8V/3V SIM card
  • RTC with power supply interface
  • Firmware upgradable via USB
  • Operating voltage: 6 ~ 12V

 

 

 
Model No.: WIGS-03
In stock
TM-W11-XBEE WIXB-01

 

  • 250kbps Max data rate
  • 300ft (100m) range
  • Built-in antenna
  • Fully FCC certified
  • 8 digital IO pins
  • 128-bit encryption

 

 

Model No.: WIXB-01
In stock
TM-W11-XBEE WIXB-02

  • 2mW output (+3dBm)
  • 400ft (120m) range
  • Built-in antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • AT or API command set

 

 

 
Model No.: WIXB-02
In stock
TM-W11-XBEE WIXB-05

 

  • 3.3V @ 215mA
  • 250kbps Max data rate
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set

 

Model No.: WIXB-05
In stock
TM-W11-A EBAR-S-05
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/USB replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.
Model No.: EBAR-S-05
In stock
TM-W11-AS SEAS-07
  • Compact, Easy to Install
  • High Sealing Performance
  • High-Quality Hall Effect Sensor
  • RoHS Compliant
Model No.: SEAS-07