In stock
TM-W11-WFS MTAM-00108
The water flow sensor outputs pulse proportional to the water flow with Pulse Frequency = Flow *4.8. That is, if the output frequency is 48, then the water flow: 48/4.8= 10(L/min)

 

 

 
Model No.: MTAM-00108
In stock
TM-W11-AS SEAS-12
  • Uses 49E analogue Hall Effect sensor
  • Detects the relative strength of the magneticfield
  • 3.3 or 5V operation 
Model No.: SEAS-12
In stock
TM-W11-BT WIBL-01
HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle.
Model No.: WIBL-01
In stock
TM-W11-BT WIBL-02
HC-06 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle.
Model No.: WIBL-02
In stock
TM-W11-AS SEAS-09

 

The Pulse Sensor can be connected to Arduino,"or plugged into a breadboard. Before we get it up and running, we need toprotect the exposed circuitry so you can get a reliable heartbeat signal.

Model No.: SEAS-09
In stock
TM-W11-PM PSPS-02
  • Ultra-thin, ultra-small
  • Low ripple and low noise
  • High efficiency, high power density 
Model No.: PSPS-02
Out of stock
TM-W11-MD HASW-19

OVERVIEW:

The discrete  Half-bridge driver based on IR2104 gate driver IC and low impedance high current N channel  IRFP4368 MOSFETS  , The IR2104 is a  high voltage, high speed power MOSFET driver with independent high and low side referenced output channels. HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard COMOS or LSTTL output, down to 3.3V logic. A gate IR2104 driver is a power amplifier that accepts a low-power input from a controller IC and produces a high-current drive input for the gate of a high-power transistor such as a power MOSFET. In essence, a gate driver consists of a level shifter in combination with an amplifier.

This drive has many application, ranging from  DC-DC power supply for high power density and efficiency, This project simplifies the design of control systems for a wide range of motor applications such as home appliances, industrial drives, DC brushed motors , Brushless motors, fans, Tesla Coil driver, Induction coil driver, LED driver, Halogen Lamp driver.

Features:

  • Load Supply 12 to 36V DC
  • Load Current 10Amps (Peak 20Amps)
  • Logic Supply 12 To 15V DC
  • Input Signals 3.3V to 15V
  • SMD based tiny design
  • Required Single PWM input
  • Shutdown Input
  • Screw Terminals for Load and Load Supply
  • Header Connector for Logic supply and inputs

Model No.: HASW-19
In stock
TM-W11-XBEE WIWF-16

Explore Trademart find out latest Keyes Xbee Shield Adapter Plate products & other electronic components at a discounted price in Pakistan with cash on delivery service across Pakistan.

Model No.: WIWF-16
In stock
TM-W11-MD ROMD-04

OVERVIEW:

A motor driver is an integrated circuit chip which is usually used to control motors in autonomous robots. Motor driver act as an interface between Arduino and the motors . The most commonly used motor driver IC’s are from the L293 series such as L293D, L293NE, etc. These ICs are designed to control 2 DC motors simultaneously. L293D consist of two H-bridge. H-bridge is the simplest circuit for controlling a low current rated motor. We will be referring the motor driver IC as L293D only. L293D has 16 pins.

Features:

  • L293D IC
  • 4 1microfarad capacitor
  • 6 Header Male pins
  • 12 Volt battery or source
  • Wires or female sockets
  • 2 Motors
  • Arduino (Any) to test the Driver
  • Computer with arduino IDE
  • Misc itmes like soldering iron , soldering Wire etc


Document:

L293d Motor Driver Module

Model No.: ROMD-04
In stock
TM-W11-MD ROMD-03

OVERVIEW:

This dual bidirectional motor driver, isbased on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit.The circuit will allow you to easily and independently control two motors of upto 2A each in both directions. It is ideal for robotic applications and wellsuited for connection to a microcontroller requiring just a couple of controllines per motor. It can also be interfaced with simple manual switches, TTLlogic gates, relays, etc. This board equipped with a power LED indicators,"onboard +5V regulator and protection diodes.

Document:

L298N Motor Driver Shield

Model No.: ROMD-03
In stock
TM-W11-QC ROQC-11

 

  • Color: mainly white.
  • Material: durable hard plastic.
  • Universal Tall Leading Gears Skids.
  • Easy to install on DJI F450 F550 SK480 FPVaerial quadcopter or similar frame.
  • Come with 8pcs M2.5*8 screws for convenientassembling.
Model No.: ROQC-11
In stock
TM-W11-TH SETH-02
  • Linear at 10.0 mV/°C scale factor
  • Suitable for remote applications
  • Operates from 4 to 30 volts
  • Less than 60 mA current drain
     



 

Model No.: SETH-02
In stock
TM-W11-MD ROMD-06

OVERVIEW:

  • High-quality stepper motor with LN2003 driver
  • Voltage: DC 5V
  • Diameter: 28mm
  • Step Angle: 5.625 x 1/64
  • Reduction Ratio: 1/64

 

Packing List:

  • 1 x Stepper motor (24cm)
  • 1 x LN2003 Driver board
Model No.: ROMD-06
In stock
TM-W11-AS SEAS-15
The reed switch contains a pair (or more) of magnetizable, flexible, metal reeds whose end portions are separated by a small gap when the switch is open. The reeds are hermetically sealed in opposite ends of a tubular glass envelope.
Model No.: SEAS-15
In stock
TM-W11-A EBAR-S-09

 

  • Onboard 5v->3v regulator provides 150mA for power-hungry cards.
  • 3v level shifting means you can use this with ease on either 3v or 5v systems.
  • Use 3 or 4 digital pins to read and write 2Gb+ of storage.
  • Activity LED lights up when the SD card is being read or written.
  • Four #2 mounting holes.
  • Tested and assembled here at the Adafruit factory.
  • Works great with Arduino, with tons of example code and wiring diagrams.
 

 

Model No.: EBAR-S-09
In stock
TM-W11-MD ROMD-11

OVERVIEW:

MINI L293D is a monolithic integrated, high voltage, high current, 4-channel driver. With this chip you can control DC motors and power supplies of up to 25 Volts.  The L293D chip is also known as H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.

Features:

  • Input voltage DC4.5-25V,
  • 600mA output current capability per channel
  • 1.2A PEAK output current(non repetitive) per channel
  • Enable facility
  • Overtemperature protection
  • Logical "0" input voltage up to 1.5 V(HIGH NOISE IMMUNITY)
  • Internal clamp diodes

Document:

Model No.: ROMD-11
In stock
TM-W11-MD ROMD-01

OVERVIEW:

Explore Trademart, Get latest Motor Driver & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We provide Motor Driver products at official prices from distributor and dealers in Pakistan.

Model No.: ROMD-01
In stock
TM-W11-MD ROMD-02

OVERVIEW:

Explore Trademart, Get latest Motor Driver & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We provide Motor Driver products at official prices from distributor and dealers in Pakistan.

Model No.: ROMD-02
In stock
TM-W11-AG SEAG-03

  • Input Voltage: 2.3 - 3.4V
  • Selectable Solder Jumpers on CLK, FSYNC andAD0
  • Digital-output temperature
Model No.: SEAG-03
In stock
TM-W11-GSM WIWF-02
  • Based on ESP-12E ESP8266 wifi board
  • All I/Os output
  • No need to press reset/flash for programming
  • R2 version has CP2102 USB-TTL converter
  • Larger current support

 

Model No.: WIWF-02
In stock
TM-W11-RF ICST-112

Explore Trademart find out latest Omron V680-HA63B RFID System products & other electronic components at a discounted price in Pakistan with cash on delivery service across Pakistan.

Model No.: ICST-112
In stock
TM-W11-A EBAR-B-1111

 

Features:

 

  • High sensitivity suitable for illuminationapplications
  • Low voltage suitable for embeddedapplications
  • Standard SCCB interface compatible with I2Cinterface
  • Supports VGA, CIF, and from a variety ofsizes CIF to 40x30
  • VarioPixel sub-sampling mode

 

Model No.: EBAR-B-1111
In stock
TM-W11-QC ROQC-13

 

  • High hold mode: With high density air pressure sensor which can precisely hold the height.
  • 2.0MP FPV Real-time Aerial HD camera: Capture and record every beautiful and unforgettable moment.
  • 5.8G Real-time photos transmission: Share the videos and photos to the LCD display at anytime anywhere.
  • 6 axis gyro: Strong stability, stronger wind resistance, easier to control. LCD display: It shows more details for your convenience to control this quadcopter.
  • Genuine Product Guarantee- Buy with absolute confidence thanks to our 100% original quadcopter from professional manufacturer.

 

 

 
Model No.: ROQC-13
In stock
TM-W11-RF WIRF-03
  • Integrated MF RC522
  • 13.56MHz contactless communication card chip.
  • Suitable for Smart meters and portablehandheld devices.
  • 14443A compatible transponder signals.
  • ISO14443A frames and error detection.
  • Low cost, and ideal for user equipmentdevelopment.

 

Model No.: WIRF-03
In stock
TM-W11-RF WIRF-07

Explore Trademart, Get latest RFID Card & other electronic components at discounted price in Pakistan with cash on delivery service across Pakistan.

Model No.: WIRF-07
In stock
TM-W11-RF WIRF-02

 

  • Using a single configurable GPIO pin.
  • Can tell if the tag is still near the antenna.
  • Both SoftwareSerial and AltSoftSerial support.

 

 

 
Model No.: WIRF-02
In stock
TM-W11-RF WIRF-05
  • Credit card RFID tag
  • Use with the Phidgets RFID Reader (RB-Phi-06)
  • Thickness: 1mm
  • Protocol: EM-4102 125KHz Read Only
Model No.: WIRF-05
In stock
TM-W11-A CWUC-3

 

Features:

 

  • PCB a single panel, size: 42mm * 24mm *12mm(max)
  • Colour: green (as the picture shows)
  • with 4 holes, about 3.1mm in diameter
  • Crystal 32.768KHz, matching capacitance 6pF, "size 2 * 6mm
  • Operating temperature: 0-- 70
  • VCC and GND must not be reversed, or it willburn the chip
Model No.: CWUC-3
In stock
TM-W11-A CWUC-02

 

  • IIC interface, the maximum transmission speedof 400KHz (5V)
  • Can be cascaded with other IIC devices, 24 C32 A0/A1/A2, the default address is 0x57
  • Battery LIR2032, to ensure the fuses during apower failure.

 

Model No.: CWUC-02
In stock
TM-W11-A EBAR-S-18

 

  • 3v level shifting means you can use this with ease on either 3v or 5v systems
  • Use 3 or 4 digital pins to read and write 2Gb+ of storage!
  • Activity LED lights up when the SD card is being read or written
  • Four #2 mounting holes
  • Tested and assembled here at the Adafruit factory
  • Works great with Arduino, with tons of example code and wiring diagrams

 

Model No.: EBAR-S-18
In stock
TM-W11-GSM WIGS-04
  • GPRS class 2/10.
  • High-Quality Product (Not hobby grade).
  • Configurable baud rate.
  • Built-in SIM Card holder.
  • Built-in Network Status LED.
  • Low power.
 

 

Model No.: WIGS-04
In stock
TM-W11-GSM WIGS-05
  • Chip:SIM800L
  • Voltage:3.7-4.2V
  • Module size: 2.5cmx2.3cm

 

 

Model No.: WIGS-05
In stock
TM-W11-GSM WIGS-02
  • GPRS mobile station class B
  • Supports Real Time Clock
  • Standard SIM Card
  • 12V DC supply
Model No.: WIGS-02
In stock
TM-W11-GSM WIGS-01
  • Dual-Band 900/ 1800 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+
  • Class 4 (2 W @900 MHz)
  • Class 1 (1 W @ 1800MHz)
 
Model No.: WIGS-01
In stock
TM-W11-MD SAVR-164

OVERVIEW:

TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors.
The stepper driver supports speed and direction control. You can set its micro-step and output current with 6 DIP switch. There are 7 kinds of micro-steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability.
As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.

Features:

  • 9V-42V DC power supply.
  • Output current: 0.5A-4.0A.
  • Drive mode: Dual constant current PWM drive output.
  • Strong anti-interference ability.
  • Low vibration, low noise.
  • Insulation resistance: >500M? at normal temperature and pressure.
  • Insulation strength: 500V/min at normal temperature and pressure.
  • With overheating, overcurrent, under-voltage lockout, input voltage anti-reverse protection, and other functions.
  • Can drive 4-wire, 6-wire, 8-wire stepper motors.


Document:

Model No.: SAVR-164
In stock
TM-W11-AS SEAS-22
  • Small module.
  • Operable up to 138°C.
  • Quality tested cooling cells.
  • Solid state, vibration free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink.
Model No.: SEAS-22
In stock
TM-W11-AS SEAS-40
  • Small module.
  • Quality tested cooling cells.
  • Solid-state, vibration-free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink.
 
Model No.: SEAS-40
In stock
TM-W11-AS SEAS-62
Utilized in high-end consumer, commercial,"and military-grade applications for extreme performance and maximum energyefficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
Model No.: SEAS-62
In stock
TM-W11-GSM SDLS-1768

 

The FMB125 is a small, professional tracker with an internal GSM antenna and an external GNSS antenna, which is able to collect device coordinates, and other useful data, and transmit them via the GSM network to the server.
Model No.: SDLS-1768
In stock
TM-W11-TH SETH-03
  • Calibrated Directly in C
  • 2C Accuracy over Temperature (Typ)
  • 0.5C Linearity (Typ)
  • Stable with Large Capacitive Loads
  • Less than 50 A Quiescent Current
  • Shutdown Current 0.5A Max
  • Low Self-Heating
Model No.: SETH-03
In stock
TM-W11-GSM DPAR-03
  • Security and integrity protection
  • Supports all satellite augmentation systems
  • Advanced jamming and spoofing detection

 

Model No.: DPAR-03
In stock
TM-W11-GSM WIGS-03
  • SIM card slot for 1.8V/3V SIM card
  • RTC with power supply interface
  • Firmware upgradable via USB
  • Operating voltage: 6 ~ 12V

 

 

 
Model No.: WIGS-03
In stock
TM-W11-XBEE WIXB-01

 

  • 250kbps Max data rate
  • 300ft (100m) range
  • Built-in antenna
  • Fully FCC certified
  • 8 digital IO pins
  • 128-bit encryption

 

 

Model No.: WIXB-01
In stock
TM-W11-XBEE WIXB-02

  • 2mW output (+3dBm)
  • 400ft (120m) range
  • Built-in antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • AT or API command set

 

 

 
Model No.: WIXB-02
In stock
TM-W11-XBEE WIXB-05

 

  • 3.3V @ 215mA
  • 250kbps Max data rate
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set

 

Model No.: WIXB-05
In stock
TM-W11-A EBAR-S-05
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/USB replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.
Model No.: EBAR-S-05
In stock
TM-W11-AS SEAS-07
  • Compact, Easy to Install
  • High Sealing Performance
  • High-Quality Hall Effect Sensor
  • RoHS Compliant
Model No.: SEAS-07