In stock
TM-W11-QC ROQC-01

 

  • 100% brand new
  • Diameter: 10 "(25.4 centimetres meters)

 

 

Model No.: ROQC-01
In stock
TM-W11-A EBAR-S-012

 

  • 5V 16-Channel Relay interface board, and each one needs 50-60mA driver current
  • Equipped with high-current relay, AC250V 10A; DC30V 10A
  • Indication LED for Relay output status
  • Size: 18 x 9 x 1.6cm
 
 

 

Model No.: EBAR-S-012
In stock
TM-W11-A EBAR-S-06

  • Interface via digital I/O pins 4,5,6, and 7
  • Relay screw terminals
  • Standardized shield shape and design
  • LED working status indicators for each relay
  • High-quality relays
Model No.: EBAR-S-06
In stock
TM-W11-IL SEIR-04
  • Very low supply current
  • Internal filter for PCM frequency
  • Improved immunity against ambient light
  • Insensitive to supply voltage ripple and noise
Model No.: SEIR-04
In stock
TM-W11-AS SEAS-60
3144 Hall switch integrated circuit based on Hall effect principle, the use of manufacturing semiconductor integrated technology of magnetic sensing circuit, it is by voltage adjusting device, Hall voltage generator, differential amplifier, Schmitt trigger, temperature compensation circuit, and an open collector output stage is composed of a magnetic sensing detection circuit.

 

 
Model No.: SEAS-60
In stock
TM-W11-A EBAR-S-03

 

  • Arduino Uno/Leonardo/Seeeduino compatible; Other board or microcontroller via jumper cables
  • Interface via digital I/O pins 4,5,6, and 7
  • Relay screw terminals
  • Standardized shield shape and design

 

Model No.: EBAR-S-03
In stock
TM-W11-QC ROQC-03
 

Features:

 

  • 100% brand new
  • High quality and lightweight.
  • 10 * 4.5" propeller.
  • With 2 sets of hubs for motor shaft of 3, 3.2, 4, 5, 6, 6.35 and 7.95mm.

 

 

 
Model No.: ROQC-03
In stock
TM-W11-IL SEIR-05

 

BFD-1000 integrates a barrier infrared sensors, unblinded distance can be adjusted by sliding rheostat. BFD-1000 has a specially designed touch detection sensor, making the design more simple from the robot.
Model No.: SEIR-05
In stock
TM-W11-QC ROQC-02

 

  • High quality, balanced, characterized byruggedness and lightweight.
  • Great upgrade for 250-300 size Mini quadcopterdrone.
  • A set of two nylon multi-copter propellers,"one normal and one pusher(reverse)
Model No.: ROQC-02
In stock
TM-W11-A EBAR-S-07

  • Standardized shield shape and design
  • LED working status indicators for each relay
  • High quality relays COM, NO (Normally Open),"and NC (Normally Closed) relay pins for each relay.
Model No.: EBAR-S-07
In stock
TM-W11-QC ROQC-48

 

Features:

  • Model: Wester A2212
  • KV:1000
  • Max Efficiency Current: 4-10A (>75%)
  • Current Capacity: 12A/60s
  • No Load Current @ 10V: 0.5A
  • No. Of Cells: 2-3 Li-Poly
  • Motor Dimensions: ?27.5 x 30mm
  • Shaft Diameter: ?3.17mm
  • Weight: 47g
Model No.: ROQC-48
In stock
TM-W11-QC ROQC-04

 

Features:

 

  • Brand Name: XXD
  • Item NO.: XXD A2212
  • Dimension: 27.8*27mm
  • Shaft diameter: 3.17mm
  • Max Efficiency: 80%
  • Max Efficiency Current: 4-10A (>75%)
Model No.: ROQC-04
In stock
TM-W11-QC ROQC-08

Explore Trademart find out latest A2212 2200KV Brushless Motor For RC Airplane Quadcopter products & other electronic components at a discounted price inPakistan with free cash on delivery service across Pakistan. We are officialdistributors of A2212 2200KV Brushless Motor For RC Airplane Quadcopter in Pakistan

Model No.: ROQC-08
In stock
TM-W11-MD ROMD-07

OVERVIEW:

The A4988 is a micro-stepping driver forcontrolling bipolar stepper motors which has a built-in translator for easyoperation. This means that we can control the stepper motor with just 2 pinsfrom our controller, or one for controlling the rotation direction and theother for controlling the steps.

Features:

  • Simple step and direction control interface
  • Five different step resolutions: full-step,"half-step, quarter-step, eighth-step, and sixteenth-step
  • Adjustable current control lets you set themaximum current output with a potentiometer, which lets you use voltages aboveyour stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control thatautomatically selects the correct current decay mode (fast decay or slow decay)
  • Over-temperature thermal shutdown,"under-voltage lockout, and crossover-current protection.

Document:

A4988 Stepper Motor Driver

Model No.: ROMD-07
In stock
TM-W11-PM PSPS-03
  • Meet UL, CE requirements
  • Ultra-thin, ultra-small
  • Low ripple and low noise
  • 100% load aging and testing

 

 

Model No.: PSPS-03
In stock
TM-W11-C SECU-01
  • 80 kHz bandwidth
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Extremely stable output offset voltage
  • Nearly zero magnetic hysteresis

Model No.: SECU-01
In stock
TM-W11-C SECU-03

The 30A range Current Sensor Module ACS712consists of a precise, low-offset, linear Hall circuit with a copper conductionpath located near the surface of the die. Applied current flowing through thiscopper conduction path generates a magnetic field in which the Hall IC convertsinto a proportional voltage.

Model No.: SECU-03
In stock
TM-W11-C SECU-02
  • 185 mV/A output sensitivity
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Nearly zero magnetic hysteresis
  • Low-noise analog signal path
  • 80 kHz bandwidth 


 

Model No.: SECU-02
In stock
TM-W11-AG SEAG-01

The ADXL335 is a small, thin, low power,"complete 3-axis accelerometer with signal conditioned voltage outputs. Theproduct measures acceleration with a minimum full-scale range of ±3 g.

Model No.: SEAG-01
In stock
TM-W11-AG SEAG-02
  • Main Chipset: ADXL345
  • Measuring Ranging: ±2g±16g
  • Digital Output: SPI/IIC
  • 3-axis, ±2g/±4g/±8g/±16g
  • Working Voltage: 3V to 5V
  • Working Temperature: -40° to 85°
  • Working Current: 30uA

 

Model No.: SEAG-02