In stock
TM-W11-QC ROQC-01

 

  • 100% brand new
  • Diameter: 10 "(25.4 centimetres meters)

 

 

Model No.: ROQC-01
In stock
TM-W11-A EBAR-S-012

 

  • 5V 16-Channel Relay interface board, and each one needs 50-60mA driver current
  • Equipped with high-current relay, AC250V 10A; DC30V 10A
  • Indication LED for Relay output status
  • Size: 18 x 9 x 1.6cm
 
 

 

Model No.: EBAR-S-012
In stock
TM-W11-A EBAR-S-06

  • Interface via digital I/O pins 4,5,6, and 7
  • Relay screw terminals
  • Standardized shield shape and design
  • LED working status indicators for each relay
  • High-quality relays
Model No.: EBAR-S-06
In stock
TM-W11-IL SEIR-04
  • Very low supply current
  • Internal filter for PCM frequency
  • Improved immunity against ambient light
  • Insensitive to supply voltage ripple and noise
Model No.: SEIR-04
In stock
TM-W11-AS SEAS-60
3144 Hall switch integrated circuit based on Hall effect principle, the use of manufacturing semiconductor integrated technology of magnetic sensing circuit, it is by voltage adjusting device, Hall voltage generator, differential amplifier, Schmitt trigger, temperature compensation circuit, and an open collector output stage is composed of a magnetic sensing detection circuit.

 

 
Model No.: SEAS-60
In stock
TM-W11-A EBAR-S-03

 

  • Arduino Uno/Leonardo/Seeeduino compatible; Other board or microcontroller via jumper cables
  • Interface via digital I/O pins 4,5,6, and 7
  • Relay screw terminals
  • Standardized shield shape and design

 

Model No.: EBAR-S-03
In stock
TM-W11-QC ROQC-03
 

Features:

 

  • 100% brand new
  • High quality and lightweight.
  • 10 * 4.5" propeller.
  • With 2 sets of hubs for motor shaft of 3, 3.2, 4, 5, 6, 6.35 and 7.95mm.

 

 

 
Model No.: ROQC-03
In stock
TM-W11-IL SEIR-05

 

BFD-1000 integrates a barrier infrared sensors, unblinded distance can be adjusted by sliding rheostat. BFD-1000 has a specially designed touch detection sensor, making the design more simple from the robot.
Model No.: SEIR-05
In stock
TM-W11-QC ROQC-02

 

  • High quality, balanced, characterized byruggedness and lightweight.
  • Great upgrade for 250-300 size Mini quadcopterdrone.
  • A set of two nylon multi-copter propellers,"one normal and one pusher(reverse)
Model No.: ROQC-02
In stock
TM-W11-A EBAR-S-07

  • Standardized shield shape and design
  • LED working status indicators for each relay
  • High quality relays COM, NO (Normally Open),"and NC (Normally Closed) relay pins for each relay.
Model No.: EBAR-S-07
In stock
TM-W11-QC ROQC-48

 

Features:

  • Model: Wester A2212
  • KV:1000
  • Max Efficiency Current: 4-10A (>75%)
  • Current Capacity: 12A/60s
  • No Load Current @ 10V: 0.5A
  • No. Of Cells: 2-3 Li-Poly
  • Motor Dimensions: ?27.5 x 30mm
  • Shaft Diameter: ?3.17mm
  • Weight: 47g
Model No.: ROQC-48
In stock
TM-W11-QC ROQC-04

 

Features:

 

  • Brand Name: XXD
  • Item NO.: XXD A2212
  • Dimension: 27.8*27mm
  • Shaft diameter: 3.17mm
  • Max Efficiency: 80%
  • Max Efficiency Current: 4-10A (>75%)
Model No.: ROQC-04
In stock
TM-W11-QC ROQC-08

Explore Trademart find out latest A2212 2200KV Brushless Motor For RC Airplane Quadcopter products & other electronic components at a discounted price inPakistan with free cash on delivery service across Pakistan. We are officialdistributors of A2212 2200KV Brushless Motor For RC Airplane Quadcopter in Pakistan

Model No.: ROQC-08
In stock
TM-W11-MD ROMD-07

OVERVIEW:

The A4988 is a micro-stepping driver forcontrolling bipolar stepper motors which has a built-in translator for easyoperation. This means that we can control the stepper motor with just 2 pinsfrom our controller, or one for controlling the rotation direction and theother for controlling the steps.

Features:

  • Simple step and direction control interface
  • Five different step resolutions: full-step,"half-step, quarter-step, eighth-step, and sixteenth-step
  • Adjustable current control lets you set themaximum current output with a potentiometer, which lets you use voltages aboveyour stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control thatautomatically selects the correct current decay mode (fast decay or slow decay)
  • Over-temperature thermal shutdown,"under-voltage lockout, and crossover-current protection.

Document:

A4988 Stepper Motor Driver

Model No.: ROMD-07
In stock
TM-W11-PM PSPS-03
  • Meet UL, CE requirements
  • Ultra-thin, ultra-small
  • Low ripple and low noise
  • 100% load aging and testing

 

 

Model No.: PSPS-03
In stock
TM-W11-C SECU-01
  • 80 kHz bandwidth
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Extremely stable output offset voltage
  • Nearly zero magnetic hysteresis

Model No.: SECU-01
In stock
TM-W11-C SECU-03

The 30A range Current Sensor Module ACS712consists of a precise, low-offset, linear Hall circuit with a copper conductionpath located near the surface of the die. Applied current flowing through thiscopper conduction path generates a magnetic field in which the Hall IC convertsinto a proportional voltage.

Model No.: SECU-03
In stock
TM-W11-C SECU-02
  • 185 mV/A output sensitivity
  • 5.0 V, single supply operation
  • Factory-trimmed for accuracy
  • Nearly zero magnetic hysteresis
  • Low-noise analog signal path
  • 80 kHz bandwidth 


 

Model No.: SECU-02
In stock
TM-W11-AG SEAG-01

The ADXL335 is a small, thin, low power,"complete 3-axis accelerometer with signal conditioned voltage outputs. Theproduct measures acceleration with a minimum full-scale range of ±3 g.

Model No.: SEAG-01
In stock
TM-W11-AG SEAG-02
  • Main Chipset: ADXL345
  • Measuring Ranging: ±2g±16g
  • Digital Output: SPI/IIC
  • 3-axis, ±2g/±4g/±8g/±16g
  • Working Voltage: 3V to 5V
  • Working Temperature: -40° to 85°
  • Working Current: 30uA

 

Model No.: SEAG-02
In stock
TM-W11-A EBAR-B-015
Brand: Arduino

 

  • GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  • PWM Spindle and direction pins
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)

 

Model No.: EBAR-B-015
In stock
TM-W11-A EBAR-B-013
Brand: Arduino

With the new Arduino M0 Pro board, the more creative individual will have the potential to create one's most imaginative and new ideas for IoT devices, wearable technologies, high-tech automation, wild robotics, and other not-yet thinkable adventures in the world of makers.

Note: As of July 23rd, 2015 Adafruit is shipping the M0 Pro which is the predecessor to the Arduino Zero. It is functionally similar to the official Arduino Zero both are supported by the Arduino IDE as official boards.
Model No.: EBAR-B-013
In stock
TM-W11-A EBAR-B-012
Brand: Arduino
  • A super case to protect your Arduino MEGA2560 R3 board.
  • Constructed from 2.8mm crystal clear acrylic,
  • with mounting bolts for the Arduino and thecase.
Model No.: EBAR-B-012
In stock
TM-W11-A CWUC-01
Brand: Arduino

 

Explore Trademart to find the latest "Ardunio" products and other electronic components at discounted prices in Pakistan with cash on delivery service available throughout the country.
 

 

Model No.: CWUC-01
In stock
TM-W11-A EBAR-B-06
Brand: Arduino

The Arduino Pro Mini is a microcontrollerboard based on the ATmega328. It has 14 digital input/output pins (of which 6can be used as PWM outputs), 6 analogue inputs, an on-board resonator, a resetbutton, and holes for mounting pin headers. A six pin header can be connectedto an FTDI cable or Sparkfun breakout board to provide USB power andcommunication to the board.

 

Model No.: EBAR-B-06
In stock
TM-W11-A EBAR-S-10
Brand: Arduino
Shield allows you to connect to various modules like sensors, servos, relays, buttons, and potentiometers, Each functional module has buckled port with VCC, GND, and Output, which has a corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, making the connections easier, secure, and more professional looking.
Model No.: EBAR-S-10
In stock
TM-W11-AS SEAS-08
  • Programmable colour light-to-frequency converter
  • Output Enable (OE) pin
  • Output frequency scaling
  • Available in 5mm x 6.2mm SOIC (D) package
Model No.: SEAS-08
In stock
TM-W11-A CWUC-09
Brand: Arduino
 
Explore Trademart to find the latest "Ardunio" products and other electronic components at discounted prices in Pakistan with cash on delivery service available throughout the country.
 

 

Model No.: CWUC-09
In stock
TM-W11-A EBAR-B-010
Brand: Arduino

Arduino Uno Proto Shield gives the possibility to carry yourArduino projects from the breadboard and turn them into a proper circuit and alsouse your specially designed circuits with Arduino.

 

Model No.: EBAR-B-010
In stock
TM-W11-A EBAR-B-08
Brand: Arduino
The Arduino UNO SMD is a version of the Arduino Uno, but uses a surface-mount version of the Atmega328P instead of the through-hole version. This version was made in response to a shortage in supply of the through-hole Atmega328P. The board is based on the ATmega328.
 

 

Model No.: EBAR-B-08
In stock
TM-W11-AB EBAM-01

 

Features:

  • NXP LPC1768 MCU
  • High-performance ARM® Cortex™-M3 Core
  • 96MHz, 32KB RAM, 512KB FLASH
  • Ethernet, USB Host/Device, 2xSPI, 2xI2C,"3xUART, CAN, 6xPWM, 6xADC, GPIO
  • Prototyping form-factor
  • 40-pin 0.1" pitch DIP package, 54x26mm
  • 5V USB or 4.5-9V supply
Model No.: EBAM-01
In stock
TM-W11-GSM WIWF-11

BeagleBone Black Wireless is based on the extremely successful BeagleBone Black open-source hardware design a high-expansion, maker-focused, community-supported open hardware computer by the BeagleBoard.org Foundation.

Model No.: WIWF-11
In stock
TM-W11-XBEE WIXB-03

 

  • Converts all 20 pins of the XBee to 0.1" standard spacing 
  • Female sockets recommended to avoid having to soldering
  • Requires 2mm sockets and 0.1" headers.

 

 

Model No.: WIXB-03
In stock
TM-W11-QC ROQC-15

 

Camera Specifications:

 

  • Wifi Camera: 0.3MP
  • FPV Wifi Transmission: 640*480P / 30FP
  • This Drone supports smartphone with iOS andAndroid System. Please download the latest APP "SYMA FPV" or"SYMA GO" on Syma website.
Model No.: ROQC-15
In stock
TM-W11-GSM WIWF-12
Using the new chip CP2102 with resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download.
 
Model No.: WIWF-12
In stock
TM-W11-WFS CONR-603

It alerts you with siren or push notification when water is detected, letting you know of a leak before it becomes a disaster. A 1.8m cable allows excellent placement flexibility under the sink, behind the water heater, or next to the washing machine, and the mounting hole behind battery case adds to installation flexibility. It is ultra power-efficient, and two AA batteries last up to 1.5

 

 

Model No.: CONR-603
In stock
TM-W11-XBEE WIXB-04

 

  • Used for the XBee module configuration parameters
  • Easily connected to a PC via micro USB cable
  • XBee-setting support software X-CTU
  • Also used as a USB-TTL adapter
  • Voltage: 5V (USB Power)

 

Model No.: WIXB-06
In stock
TM-W11-PM PSPS-10
This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V.
Model No.: PSPS-10
In stock
TM-W11-TH SETH-04
The DHT11 and DHT22 sensors are used tomeasure temperature and relative humidity. These are very popular among makersand electronics hobbyists. These sensors contain a chip that does analogueto digital conversion and spit out a digital signal with the temperature andhumidity.

 

Model No.: SETH-04
In stock
TM-W11-TH SETH-07
  • Low cost
  • 3 to 5V power and I/O
  • Good for 0-100% humidity readings with 2-5% accuracy
  • No more than 0.5 Hz sampling rate (once every 2 seconds)


Model No.: SETH-07
In stock
TM-W11-MD SDLS-889

OVERVIEW:

Explore Trademart, Get the latest Etech & other electronic components at discounted prices in Pakistan with free cash on delivery service across Pakistan. We provide Etech at official prices from distributors and dealers in Pakistan.

Model No.: SDLS-889
In stock
TM-W11-TH SETH-13
 
The CAREL DP series electronic probes are designed for air-conditioning and air handling, heating and refrigeration applications, to be used in combination with the corresponding CAREL controllers. Versions are available for rooms, industrial environments and ducts.
Model No.: SETH-13
In stock
TM-W11-RF WIRF-08

RFID cards are a common form of packaging for RFID tags. They are secure, convenient, and durable. They are very suitable for access control, payment, identification, and other applications.

Model No.: WIRF-08
In stock
TM-W11-GSM WIWF-09

  • Supports UART/SPIII2CPWMADC/DAC
  • SM D-38 package for easy welding
  • Deep sleep current as low as 6.5iiA
  • Embedded Lwip and FreeRTOS

 

 

Model No.: WIWF-09
In stock
TM-W11-GSM WIWF-03

ESP8266 12E is a miniature Wi-Fi modulepresent in the market and is used for establishing a wireless networkconnection for a microcontroller or processor. The core of ESP-12E is ESP8266EX,"which is a high integration wireless SoC (System on Chip).

Model No.: WIWF-03
In stock
TM-W11-GSM WIWF-01
  • 802.11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Power down leakage current of <10uA
  • MB Flash Memory
  • SDIO 1.1 / 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO

 

Model No.: WIWF-01
In stock
TM-W11-GSM WIWF-08

  • Communication interface voltage: 3.3V
  • Working current: 240mA(MAX)
  • Serial communication format: 8N1
  • Antenna Type: Built-in PCB antenna is available
  • Wireless criteria: 802.11 b / g / n

 

 
Model No.: WIWF-08
In stock
TM-W11-GSM WIWF-06
  • ESP8266 microcontroller NodeMCU Lua WIFI withCP2102 USB.
  • Expand two-way motor-driven, two-waydirect-drive motor.

 

Model No.: WIWF-06
In stock
TM-W11-GSM WIWF-04

 

Open-source, Interactive, Programmable, Lowcost, Simple, Smart, WI-FI enabled
Model No.: WIWF-04
In stock
TM-W11-GSM WIWF-10

Overview:

The ESP8266 Witty Cloud ESP-12F WiFi Module is a powerful WiFi enabled processor in a compact package that incorporates an RGB LED, LDR light sensor and pushbutton for easy stand-alone operation.
 

Features:

This cheap and small Wifi transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, and can also talk to your Wifi router directly through the UART MCU's (Rx, Tx).

  • The ESP-12 module is one of the most complete of the ESP family as it allows you to use the biggest amount of pins of all of them. You can program this module to work stand alone with the Arduino IDE or with LUA as NodeMCU.
  • It has an LDR and a WS2812 led already on board for your projects. The board comes with a CH40 micro USB module to program it.
  • The ESP8266 highly integrated chip, including antenna switch balun, power management converter, so with minimal external circuitry. The system is equipped with ESP8266 manifested leading features are: energy saving VoIP quickly switch between the sleep/wake patterns, with low-power operation adaptive radio bias, front-end signal processing functions.
  • This version, the ESP8266-03 is one of the smallest versions of this module. It includes a built-in ceramic antenna.

 

Model No.: WIWF-10