Store:
DIGILOG ELECTRONICS
Location:
Contact vendor
In stock
ID11873 B533,DELL
  • Motor Frame Size: 1.1 in. sq.
  • Shaft: Single
  • Type: Standard
  • Shaft-Gear Type: Round Shaft (No Gearhead)
  • Lead Wires: 5
  • Current per Phase: 0.75 A per phase
  • Step Angle: 0.72 °
  • Rotor Inertia (oz-in2): 0.05 oz-in2
  • Maximum Holding Torque (lb-in): 0.29
Contact us for a price
In stock
ID11665 L2,Th1
  • Design with 2 analogue clocks showing output voltage and current load current.
  • LED meter shows the output voltage and DC test meter, accompanied by a diode test phone wave.
  • The USB port provides DC 5V / 1A fixed power and DC 9V port.
  • The function to automatically cut off power when touching the circuit.
  • Button to select the function to automatically turn on again when power off or shut down to turn it on again.
  • Switches can choose maximum load current of 2A or 500mA.
  • Switch to select LED display mode (output voltage, test, or off).
  • DCV 100V test function.
  • Report errors by ringing signals, the system recognizes errors intelligently.
In stock
ID9206 B512KRT148
  • Step Angle: 1.8
  • Holding Torque: 4.8kg.cm
  • Rated Voltage: 3.6Volt
  • Rated Current: 1.2A/Phase
  • Form Factor: NEMA 17
  • Shaft Type D-Shaft
  • Wire Connector JST PH male connector.
  • 2-Phase (4-Wires)
  • Holding Torque: 48N.cm (4800g-cm)
In stock
  • Model No: PMM33AH2C39
  • Precise Positioning and simple in design
  • Low Vibration
  • Low Noise operation
  • Step Angle: 0.72 Degree
  • Current Rating: 0.75A
In stock
ID10356 B534,L2,Th1
Specifications:
  • Input: 100-240V AC 50/60Hz
  • Output : DC 5V 10A
In stock
ID10230 B682,TMD100,Th20,KRT 83
  • Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
  • This is a high-quality motor that can be used for a long time without stuck.
  • It has a quite stable performance during work and will not lose a step.
  • Low noise and big torque, this is a great choice if you need a stepper motor.
  • Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.