Description
Shinho X-500 Description:
Features:
*Handheld, Small, Light
*Industrial standard screen
*Various colors are available
*Core to core digital alignment
*8s splicing stime,26s tube heating time
*5800mAh and pluggableLi-battery, Typical 200cycles
*ARC calibrated bytemperature and air pressureautomatically
*Automatically switching on windshield andheater in 4steps
*Apply to bare fibers, indoor cablesand jumper wiressplicing
- Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
- Fiber count Single
- Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160 -900μm
- Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
- Return loss >60db
- Fiber cleaved length 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
- Splicing program 40 groups
- Operate mode Manual, Automatic
- Auto-heating Available
- Typical splicing time 8 seconds
- Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
- Fiber view magnification 250X(X or Y view), 125X(X and Y view)
- Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
- Storage of splice result 4000 results
- Loss evaluation Available
- Tension test 1.8-2.2N
- Interface GUI menu interface, easier operation
- Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
- Power supply Adaptor, input: AC100-240V(50/60HZ)
- Electrode life More than 4000 ARC discharges, can be replaced conveniently
- Terminals USB 2.0 port, for uploading splice results and upgrading software
- Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10ºC~+50ºC;Wind speed: max 15m/s
- Dimension 149mm(L)x120mm(W)x127mm(H)
- Weight 1.9kg including battery